|
Title: Am i correct that you cannot put DB killers in Arrow and Termi CF Cans? Post by: WhiteStripe on June 11, 2009, 05:18:35 AM Seems like they are only available on the Ti versions. Can someone confirm this? Can you use a Ti DB killer in a CF can anyway?
Thanks! Title: Re: Am i correct that you cannot put DB killers in Arrow and Termi CF Cans? Post by: Cicero on June 11, 2009, 07:39:55 AM For which bike?
Title: Re: Am i correct that you cannot put DB killers in Arrow and Termi CF Cans? Post by: Cicero on June 11, 2009, 07:44:47 AM This might help you out, it doesn't address you question specifically, but I see CF termis, getting baffled in there.
http://ducatimonsterforum.org/index.php?topic=24498.15 (http://ducatimonsterforum.org/index.php?topic=24498.15) Title: Re: Am i correct that you cannot put DB killers in Arrow and Termi CF Cans? Post by: teddy037.2 on June 11, 2009, 08:25:11 AM my Ti arrows never came w/baffles, and I don't see any sort of way to fit some in (no holes for screws, or grooves for c-clips.... nothin')
Title: Re: Am i correct that you cannot put DB killers in Arrow and Termi CF Cans? Post by: Armor on June 11, 2009, 08:37:24 AM I have carbon Arrows that came with removable DB killers.
Title: Re: Am i correct that you cannot put DB killers in Arrow and Termi CF Cans? Post by: mtn_mnztr on June 11, 2009, 08:42:07 AM I HAD carbon Arrows that came with removable DB killers. dittoTitle: Re: Am i correct that you cannot put DB killers in Arrow and Termi CF Cans? Post by: Speeddog on June 11, 2009, 08:48:21 AM I've installed a set of endcaps with dB-killers in a set of carbon Arrows cans.
Title: Re: Am i correct that you cannot put DB killers in Arrow and Termi CF Cans? Post by: numbskull on June 11, 2009, 09:29:20 AM My carbon Termis came with baffles in the box as well.
Title: Re: Am i correct that you cannot put DB killers in Arrow and Termi CF Cans? Post by: WhiteStripe on June 11, 2009, 10:44:26 AM thanks. must only list the part under the Ti b/c they are the same. Appreciate the help.
Title: Re: Am i correct that you cannot put DB killers in Arrow and Termi CF Cans? Post by: teddy037.2 on June 11, 2009, 11:38:35 AM I've installed a set of endcaps with dB-killers in a set of carbon Arrows cans. which end caps? I was thinking of looking into some sort of way to baffle my cans, in case I decide to pull commute duty on the monster, and I'd hate to piss off the new neighbors Title: Re: Am i correct that you cannot put DB killers in Arrow and Termi CF Cans? Post by: Boris on June 12, 2009, 03:59:17 PM Here is e-mail exchange with Greg Centuori from Arrow.
Quote Re: 2004 Ducati S4R CF Arrow End Caps with BafflesTuesday, April 28, 2009 11:01 AM From: "Greg Centuori" <info@arrowexhaust.com>Add sender to Contacts To: "Boris ...." <haloguy.....com> Boris, Thanks for your purchase of Arrow exhaust for your Ducati. I can assist you with your request. The homologation kit for your silencers costs $219.00 plus shipping. Let me know if you have any further questions or if you would like to order a kit. Best Regards, Greg Centuori Arrow Exhaust, USA ----- Original Message ----- From: "Boris ...." <haloguy......com> To: <info@arrowexhaust.com> Sent: Tuesday, April 28, 2009 9:54 AM Subject: 2004 Ducati S4R CF Arrow End Caps with Baffles > Hi Greg, > > > > I have 2004 Ducati Monster S4R with Carbon Fiber Arrow exhaust installed > that is getting too loud for me (49 years old and getting older every day > :-). I would like to get new end caps that have the clips for the baffles > and install it on my pipes so I can have quieter pipes for everyday riding > with option to take the baffles out while on track. I found your e-mail on > Ducati Monster List and was told that you can facilitate my request. > > > > Thanks > > > > Boris Title: Re: Am i correct that you cannot put DB killers in Arrow and Termi CF Cans? Post by: Gus Duc on June 13, 2009, 02:18:05 PM Seems that some of the Arrows, especially the Ti cans, came with the end caps that have the grove that allows you to run baffles. My carbons didn't so I purchased a set of the above mentioned endcaps & baffles from Greg @ Arrow USA but I never got around to installing them. I know another member here did so on his S4rt & he claims to have gained some bottom end as well. They seem very restrictive but you can always drill some extra holes or just take them out.
Title: Re: Am i correct that you cannot put DB killers in Arrow and Termi CF Cans? Post by: MiniSuper on July 29, 2012, 09:38:09 PM I am sorry to revive this ancient threat. I recently purchased an s2r 1000 with FBF full carbon exhaust, which I was told is re-badged Arrow. I am looking for db killers due to noise issue. Does anyone still have the db killers and/or the endcaps?
Anyone knows how effective are the killers? Right now I am setting off alarms and waking neighbors. Title: Re: Am i correct that you cannot put DB killers in Arrow and Termi CF Cans? Post by: slowkitty on July 31, 2012, 06:46:34 AM You can buy the DB killers from Arrow. My local Arrow agent quoted me about $60 for a pair. They must come with the circlips.
Title: Re: Am i correct that you cannot put DB killers in Arrow and Termi CF Cans? Post by: MiniSuper on July 31, 2012, 01:58:43 PM slowkitty, I've contacted Arrow.it directly and they refer me to their US representative who quoted me 80 USD per pair. It is good to know that I could get them cheaper. Do you mind telling me which dealer did you get that quote from? Some of the posters have said that I need the slotted end cap for the db killers to stay in. Have you done it with out changing the end cap? Can you describe the process?
Title: Re: Am i correct that you cannot put DB killers in Arrow and Termi CF Cans? Post by: Nero-92 on July 31, 2012, 03:43:22 PM Might seem like a stupid question but why the need for db killers. I'm Irish really.
Title: Re: Am i correct that you cannot put DB killers in Arrow and Termi CF Cans? Post by: slowkitty on July 31, 2012, 04:44:06 PM slowkitty, I've contacted Arrow.it directly and they refer me to their US representative who quoted me 80 USD per pair. It is good to know that I could get them cheaper. Do you mind telling me which dealer did you get that quote from? Some of the posters have said that I need the slotted end cap for the db killers to stay in. Have you done it with out changing the end cap? Can you describe the process? Hiya, I'm based in Singapore and I think freight will kill the price difference. It is odd, but when I was looking for an Arrow exhaust badge, it sells for about 10 quid but I got it in Singapore for less than that. |