Ducati Monster Forum

Moto Board => General Monster Forum => Topic started by: angler on June 30, 2009, 05:36:50 PM

Title: So that is what the beer tray was for......
Post by: angler on June 30, 2009, 05:36:50 PM
First ride after a rain with a passenger and boy did she get soaked!  Ooops.  She asked me why I chopped the tail and I told her I didn't buy the bike to carry passengers......
Title: Re: So that is what the beer tray was for......
Post by: He Man on June 30, 2009, 05:50:49 PM
lol every bike has it  and yes thats what its called if she didnt get wet, you would of ! so thank her for her sacrafice!
Title: Re: So that is what the beer tray was for......
Post by: NekkedChic on July 01, 2009, 05:08:26 AM
ok, after reading much about it, I STILL have no friggin clue what this "beer tray" is. Someone pleez post a pic including one of it ON a bike so I know where it it also?????  Thanks  [roll]
Title: Re: So that is what the beer tray was for......
Post by: Monsterlover on July 01, 2009, 05:11:35 AM
It's the plastic "tray" behind the brake light that everyone cuts off :)
Title: Re: So that is what the beer tray was for......
Post by: TAftonomos on July 01, 2009, 05:22:18 AM
Quote from: Monsterlover on July 01, 2009, 05:11:35 AM
It's the plastic "tray" behind the brake light that everyone cuts off :)

+1

It's like those tags they put on your mattress that say "DO NOT REMOVE"  FU, I bought this thing, I'm going to remove what I want! ;D
Title: Re: So that is what the beer tray was for......
Post by: Slide Panda on July 01, 2009, 05:31:52 AM
Those tags say Not to be removed, except by the consumer...

With a full tail chop, you'll get the rooster tail fling on you too, not just a passenger - and if you have to ride through some muddy puddles.. it makes a spectacular mess.. but that's a different story.

Title: Re: So that is what the beer tray was for......
Post by: RavnMonster on July 01, 2009, 05:39:06 AM
just put a nice CF hugger on it
Title: Re: So that is what the beer tray was for......
Post by: swampduc on July 01, 2009, 06:11:58 AM
Quote from: RavnMonster on July 01, 2009, 05:39:06 AM
just put a nice CF hugger on it
Doesn't help much, but still looks good, so do it anyway  [thumbsup]

Nekkidchic, look at Arc de Duc's bike half way down - behind the seat cowl, that's a beer tray.

http://ducatimonsterforum.org/index.php?topic=205.1140 (http://ducatimonsterforum.org/index.php?topic=205.1140)
Title: Re: So that is what the beer tray was for......
Post by: sbrguy on July 01, 2009, 07:04:55 AM
the beer tray some people also call it the "duck bill" as it looks a little like.. a ducks bill.
Title: Re: So that is what the beer tray was for......
Post by: redial on July 01, 2009, 08:28:19 AM
Quote from: NekkedChic on July 01, 2009, 05:08:26 AM
ok, after reading much about it, I STILL have no friggin clue what this "beer tray" is. Someone pleez post a pic including one of it ON a bike so I know where it it also?????  Thanks  [roll]

grab two beers and stand around your bike with a friend. then feel like you need to take something apart to show him how awesome you are

look for a place to sit your beer so your hands are free.

you will immediately find the so called "beer tray" works like a charm even on a sidestand. convinced my friend who leaves his bike in my garage to leave his tail intact for just this reason  ;D (you didnt think id leave mine on did you?)
Title: Re: So that is what the beer tray was for......
Post by: Buckethead on July 01, 2009, 08:43:38 AM
Except that she rides a 696, so her bike didn't come with one.
Title: Re: So that is what the beer tray was for......
Post by: redial on July 01, 2009, 10:10:42 AM
(http://www.barnold.com/img/ducati-plate-relocator-04.jpg)

mystery revealed!
Title: Re: So that is what the beer tray was for......
Post by: duc996 on July 02, 2009, 05:51:51 AM
I don't miss my beer tray at all.
Title: Re: So that is what the beer tray was for......
Post by: va122 on July 02, 2009, 06:13:22 AM
Quote from: duc996 on July 02, 2009, 05:51:51 AM
I don't miss my beer tray at all.

+1 FUGLY
Title: Re: So that is what the beer tray was for......
Post by: redial on July 02, 2009, 06:47:34 AM
sometimes i do when i dismount wearing a dress shirt with a mud racing stripe down the back from the rear tire.

but only for a moment
Title: Re: So that is what the beer tray was for......
Post by: angler on July 02, 2009, 07:14:03 AM
I don't miss mine at all either.  I don't commute, so I pick when I ride.  I've been caught out three times.  Twice it was pouring so I didn't notice the stripe on the back as I was soaked anyway.  The GF is a sport and really doesn't mind.  The biggest problem that night is she was wearing low rise jeans so a little of her back was exposed between her jacket and her pants, thereby funneling all the water into her jeans.

Made it a perfect time for one of my favorite puns "Why don't you take off your pants and jacket?"
Title: Re: So that is what the beer tray was for......
Post by: yamifixer on July 02, 2009, 08:04:18 AM
I took mine off once and made a much smaller piece to go in its place, my wife said she liked the stock piece so I put it back on. What baby wants baby gets.
Title: Re: So that is what the beer tray was for......
Post by: mstevens on July 02, 2009, 11:08:01 AM
I like my beer tray. To me the bike looks truncated without it, perhaps because the bike must be truncated in order to remove it.

I don't like the christmas tree of reflectors, license holder, etc. that used to hang down below the beer tray. Mine has been removed and replaced with a license plate relocator so things look pretty much like redial's picture.
Title: Re: So that is what the beer tray was for......
Post by: duc996 on July 02, 2009, 08:42:58 PM
It's just it looks like it really doesn't belong on the bike at all. It's so out of proportion on the bike.Just my two centavos.
Title: Re: So that is what the beer tray was for......
Post by: Itsasickness on July 03, 2009, 08:37:48 AM
Quote from: TAftonomos on July 01, 2009, 05:22:18 AM
+1

It's like those tags they put on your mattress that say "DO NOT REMOVE"  FU, I bought this thing, I'm going to remove what I want! ;D
Classic LMFAO  [thumbsup]
Title: Re: So that is what the beer tray was for......
Post by: somegirl on July 03, 2009, 07:45:08 PM
Quote from: mstevens on July 02, 2009, 11:08:01 AM
I like my beer tray. To me the bike looks truncated without it, perhaps because the bike must be truncated in order to remove it.

I don't like the christmas tree of reflectors, license holder, etc. that used to hang down below the beer tray. Mine has been removed and replaced with a license plate relocator so things look pretty much like redial's picture.

I agree, the chopped bikes look out of proportion to me.

And I also used a license plate relocator. [thumbsup]
Title: Re: So that is what the beer tray was for......
Post by: Ddan on July 04, 2009, 02:55:50 AM
Quote from: somegirl on July 03, 2009, 07:45:08 PM
I agree, the chopped bikes look out of proportion to me.

And I also used a license plate relocator. [thumbsup]

One more for the beer tray and relocator.  The tail chop always reminds me of a docked dogs ass.     ;D
Title: Re: So that is what the beer tray was for......
Post by: rgramjet on July 04, 2009, 05:34:19 AM


Tail chop gives it a forward leaning aggressive stance, like its ready to spring forward.  I loves my tail chop, complete with 20 guage shotgun shells!

To each their own...
Title: Re: So that is what the beer tray was for......
Post by: va122 on July 04, 2009, 10:45:42 AM
Quote from: rgramjet on July 04, 2009, 05:34:19 AM

Tail chop gives it a forward leaning aggressive stance, like its ready to spring forward.  I loves my tail chop, complete with 20 guage shotgun shells!

To each their own...

Is that a chrome tank in your avitar?? :o

Oh and i chopped as soon as i got my bike.
Title: Re: So that is what the beer tray was for......
Post by: Popeye the Sailor on July 04, 2009, 11:45:05 AM
Quote from: rgramjet on July 04, 2009, 05:34:19 AM

Tail chop gives it a forward leaning aggressive stance, like its ready to spring forward.  I loves my tail chop, complete with 20 guage shotgun shells!

To each their own...

That's why I installed a center stand. On the side stand it totally leaned like a drunken sailor, given the impression it was about to spring over, into a lowside.  ;D


Perspective  :)
Title: Re: So that is what the beer tray was for......
Post by: NekkedChic on July 08, 2009, 06:22:04 PM
Quote from: redial on July 01, 2009, 08:28:19 AM
grab two beers and stand around your bike with a friend. then feel like you need to take something apart to show him how awesome you are

look for a place to sit your beer so your hands are free.

you will immediately find the so called "beer tray" works like a charm even on a sidestand. convinced my friend who leaves his bike in my garage to leave his tail intact for just this reason  ;D (you didnt think id leave mine on did you?)

OHHHHHHHH!!!!!   geesh I feel stupider now.  Thanks tho!  :lol:   
Except mine would be a capuccino tray  ;D   

and thats also why I could not figure out from pix ppl showed me where the hell it is/was, becuz the 696 does not have this evidentally.  TKS!