|
Title: Who Does Corse Cuts On Clutch Side Cases? Post by: RAT900 on April 30, 2010, 11:47:21 AM I have a spare right side cover that could use the ventilating cuts machined around the clutch basket area
Anyone know of a board member/sponsor/vendor etc who does this work? Looking for a good clean professional job with radius'd corners etc as opposed to my wrecking it with my madd skillz using a sawzall and a dremel Title: Re: Who Does Corse Cuts On Clutch Side Cases? Post by: Düb Lüv on April 30, 2010, 02:32:44 PM +1
Title: Re: Who Does Corse Cuts On Clutch Side Cases? Post by: ducrider45 on April 30, 2010, 03:41:59 PM Sawzall that bad boy! [evil]
Title: Re: Who Does Corse Cuts On Clutch Side Cases? Post by: He Man on April 30, 2010, 03:51:53 PM Sawzall that bad boy! [evil] Get a drill press, turn that bad boy on, and feed the case cover into it!!! Title: Re: Who Does Corse Cuts On Clutch Side Cases? Post by: Speeddog on April 30, 2010, 03:54:26 PM How do you want it to look?
Title: Re: Who Does Corse Cuts On Clutch Side Cases? Post by: 1KDS on April 30, 2010, 04:24:24 PM Like Travman's?
(http://i292.photobucket.com/albums/mm21/JonTravisKing/Ducati%202005%20Monster%201000s/20100212_05.jpg?t=1266021594) Title: Re: Who Does Corse Cuts On Clutch Side Cases? Post by: Travman on April 30, 2010, 04:42:11 PM That was done at DucPond for about $75.
http://www.ducpond.com/contact.html (http://www.ducpond.com/contact.html) I think it would be cool to see a right side cover that was simply drilled something like this S&S air cleaner cover. Then you could match a similarly drilled clutch cover. (http://i292.photobucket.com/albums/mm21/JonTravisKing/Misc/20061023_SSCover4.jpg?t=1272681472) Title: Re: Who Does Corse Cuts On Clutch Side Cases? Post by: Düb Lüv on April 30, 2010, 04:50:01 PM i knew i remembered seeing a place that machines covers.
here it is $75 http://www.foxperformanceengines.com/clutch.html (http://www.foxperformanceengines.com/clutch.html) Title: Re: Who Does Corse Cuts On Clutch Side Cases? Post by: crimsoncloak on April 30, 2010, 05:00:17 PM I have a nice vintage one on ebay from my 1997 748, I dunno if they interchange. Radiused nicely. I basically copied the corse mag cover cut pattern. If you need better pics of how it is cut so you can have someone local get it looking nice I can send you some if you pm me your email.
I see alot of them on ebay, but very few of them are done in a way that flows with the lines correctly. Take a look at the accesory magnesium cover one of the Ducati dealer's websites if you are curious. I.E. http://www.desmoworks.com/images/0863.CARTFRIM.jpg (http://www.desmoworks.com/images/0863.CARTFRIM.jpg) Title: Re: Who Does Corse Cuts On Clutch Side Cases? Post by: kopfjäger on April 30, 2010, 06:12:33 PM This one was done at the Ducshop.
(http://i201.photobucket.com/albums/aa91/chiflado/feral009.jpg) Title: Re: Who Does Corse Cuts On Clutch Side Cases? Post by: RAT900 on April 30, 2010, 06:42:20 PM Yup the one right above and the one 1KDS's post is what I had in mind
Thanks guys I will check out DucPond and Ducshop Title: Re: Who Does Corse Cuts On Clutch Side Cases? Post by: junior varsity on May 01, 2010, 09:46:31 AM Fox Performance does this i believe, as well as an eBayer.
http://www.foxperformanceengines.com/clutch.html (http://www.foxperformanceengines.com/clutch.html) Title: Re: Who Does Corse Cuts On Clutch Side Cases? Post by: TAftonomos on May 02, 2010, 03:08:30 PM Fox and ducpond will do it for $75
Ducshop will charge you $140, and take it next door and have it machined. My experience/.02 I've used both, guess who I use now? Title: Re: Who Does Corse Cuts On Clutch Side Cases? Post by: Düb Lüv on May 02, 2010, 05:57:01 PM Ducshop will charge you $140, and take it next door and have it machined. My experience/.02 [laugh] [laugh] [laugh] [laugh] [laugh] [laugh] [laugh] Title: Re: Who Does Corse Cuts On Clutch Side Cases? Post by: eichh on May 04, 2010, 01:04:02 AM Didnt a member buy a CNC machine for their house?
Title: Re: Who Does Corse Cuts On Clutch Side Cases? Post by: supertjeduc on May 04, 2010, 08:36:21 AM I bought the real thing and paid about 200€
(http://supertjeduc.zenfolio.com/img/v12/p298947597-4.jpg) And yes it is magnesium Title: Re: Who Does Corse Cuts On Clutch Side Cases? Post by: kopfjäger on May 04, 2010, 08:46:19 AM ^^ [evil] [thumbsup]
Title: Re: Who Does Corse Cuts On Clutch Side Cases? Post by: Amlethae on May 04, 2010, 08:50:33 AM I bought the real thing and paid about 200€ And yes it is magnesium Hot shit! Love it! Where the hell did you find a price like that for it?!?! Title: Re: Who Does Corse Cuts On Clutch Side Cases? Post by: supertjeduc on May 04, 2010, 09:59:32 AM Hot shit! Love it! Where the hell did you find a price like that for it?!?! Italy (ebay.it) Title: Re: Who Does Corse Cuts On Clutch Side Cases? Post by: Düb Lüv on May 04, 2010, 10:37:59 AM at first i thought you paid 200 euro for a non-magnesium one
Title: Re: Who Does Corse Cuts On Clutch Side Cases? Post by: Buckethead on May 04, 2010, 10:44:34 AM I have a spare one sitting around gathering dust if anyone's interested. I'm headed over to the storage unit tomorrow and I'll grab it so I can get pics.
Edit: It's aluminum, not mag. |