Who Does Corse Cuts On Clutch Side Cases?

[RAT900]

I have a spare right side cover that could use the ventilating cuts machined around the clutch basket area

Anyone know of a board member/sponsor/vendor etc who does this work? 

Looking for a good clean professional job with radius'd corners etc

as opposed to my wrecking it with my madd skillz using a sawzall and a dremel

[Düb Lüv]

+1

[ducrider45]

Sawzall that bad boy!

[He Man]

Sawzall that bad boy!

Get a drill press, turn that bad boy on, and feed the case cover into it!!!

[Speeddog]

How do you want it to look?

[1KDS]

Like Travman's?

[Travman]

That was done at DucPond for about $75.
http://www.ducpond.com/contact.html

I think it would be cool to see a right side cover that was simply drilled something like this S&S air cleaner cover.  Then you could match a similarly drilled clutch cover. 

[Düb Lüv]

i knew i remembered seeing a place that machines covers.

here it is $75
http://www.foxperformanceengines.com/clutch.html

[crimsoncloak]

I have a nice vintage one on ebay from my 1997 748, I dunno if they interchange.  Radiused nicely.  I basically copied the corse mag cover cut pattern.  If you need better pics of how it is cut so you can have someone local get it looking nice I can send you some if you pm me your email.

I see alot of them on ebay, but very few of them are done in a way that flows with the lines correctly.  Take a look at the accesory magnesium cover one of the Ducati dealer's websites if you are curious.

I.E.

http://www.desmoworks.com/images/0863.CARTFRIM.jpg

[Kopfjager]

This one was done at the Ducshop.

[RAT900]

Yup the one right above and the one 1KDS's post is what I had in mind

Thanks guys I will check out DucPond and Ducshop

[junior varsity]

Fox Performance does this i believe, as well as an eBayer.



http://www.foxperformanceengines.com/clutch.html

[TAftonomos]

Fox and ducpond will do it for $75
Ducshop will charge you $140, and take it next door and have it machined.

My experience/.02

I've used both, guess who I use now?

[Düb Lüv]

Ducshop will charge you $140, and take it next door and have it machined.

My experience/.02

[eichh]

Didnt a member buy a CNC machine for their house?