Print Page - need 2005 s2r 800 rear wheel nut torque values in foot lbs.

Title: need 2005 s2r 800 rear wheel nut torque values in foot lbs.
Post by: badgalbetty on May 02, 2010, 04:59:46 AM

gonna fit a new tire today and wondered if anyone knew how tight I should do up the nut for the wheel after. I thinks its 70 ft lbs but cannot remember.
Thanks
BGB.

Title: Re: need 2005 s2r 800 rear wheel nut torque values in foot lbs.
Post by: corey on May 02, 2010, 05:18:46 AM

according to my shop manual, 176 nm... which equals roughly 127.5 ft/lbs. a good deal higher than 70...
the manual also calls for grease on the threads.

make sure you get the pegs in the holes on the wheel, and not in the slot.
and make sure you get that snapring on there properly. [thumbsup]

Title: Re: need 2005 s2r 800 rear wheel nut torque values in foot lbs.
Post by: badgalbetty on May 02, 2010, 08:34:00 AM

Thanks! :-*
When I am done the last thing I do is zip tie the snap ring ends, that way they dont come off......... [thumbsup]
Erica.

Title: Re: need 2005 s2r 800 rear wheel nut torque values in foot lbs.
Post by: badgalbetty on May 02, 2010, 12:51:39 PM

All back together, . Thanks!

Title: Re: need 2005 s2r 800 rear wheel nut torque values in foot lbs.
Post by: corey on May 02, 2010, 05:41:32 PM

Quote from: badgalbetty on May 02, 2010, 08:34:00 AM
Thanks! :-*
When I am done the last thing I do is zip tie the snap ring ends, that way they dont come off......... [thumbsup]
Erica.

No Prob... and that's a good idea! I'm gonna do that too!

Ducati Monster Forum

Moto Board => Tech => Topic started by: badgalbetty on May 02, 2010, 04:59:46 AM