need 2005 s2r 800 rear wheel nut torque values in foot lbs.

[badgalbetty]

gonna fit a new tire today and wondered if anyone knew how tight I should do up the nut for the wheel after. I thinks its 70 ft lbs but cannot remember.
Thanks
BGB.

[corey]

according to my shop manual, 176 nm... which equals roughly 127.5 ft/lbs. a good deal higher than 70...
the manual also calls for grease on the threads.

make sure you get the pegs in the holes on the wheel, and not in the slot.
and make sure you get that snapring on there properly.

[badgalbetty]

Thanks!
When I am done the last thing I do is zip tie the snap ring ends, that way they dont come off.........
Erica.

[badgalbetty]

All back together, . Thanks!

[corey]

Thanks!
When I am done the last thing I do is zip tie the snap ring ends, that way they dont come off.........
Erica.

No Prob... and that's a good idea! I'm gonna do that too!