So I had a little spill on the left side of the bike, & broke the footrest plate. I ordered & recieved the new one from commonwealth ducati & had an issue on installing it.
the two upper bolts that mount the footplate to the frame stripped, & one of the bolts that mount the footplate to the engine broke.
I used an extractor & got that bolt out cleanly, & bought new bolts from the ducati dealership, but they weren't long enough.
After some research I think the high mount termi's came with 10mm spacers & longer bolts for the footplate mounting points, so where can i buy the replacement bolts?
your local home depot? ???
http://www.mcmaster.com (http://www.mcmaster.com)
I got some 8x1.25-45mm bolts at lowe's, along with nylon sleeves & got a pretty good fit.
But I would still like to get a hold of the correct bolts.
Are there other exhaust companies that use 10mm spacers & longer bolts at the footrest plate mounting points? maybe I could get a set from one of them?
http://www.bevelheaven.com/productinfo.html (http://www.bevelheaven.com/productinfo.html)
boltdepot.com
Quote from: howie on June 03, 2010, 05:00:48 PM
http://www.mcmaster.com (http://www.mcmaster.com)
cool, I found a few on here that are pretty close
Quote from: yuu on June 04, 2010, 04:33:45 AM
http://www.bevelheaven.com/productinfo.html (http://www.bevelheaven.com/productinfo.html)
was there something in particular on this site you wanted me to see? I looked through everything that might be applicable, but found nothing.
anyone? anyone?
Quote from: Titus on June 12, 2010, 04:01:17 PM
anyone? anyone?
Hi Titus,
I am in the exact same situation - I have high mount termi pipes on my monster and some of the bolts dont bite - did you find an exact match anywhere ?
BEn