Need new Termignoni bolts for footrest plate (2007 M695)

[Titus]

So I had a little spill on the left side of the bike, & broke the footrest plate.  I ordered & recieved the new one from commonwealth ducati & had an issue on installing it.

the two upper bolts that mount the footplate to the frame stripped, & one of the bolts that mount the footplate to the engine broke. 

I used an extractor & got that bolt out cleanly, & bought new bolts from the ducati dealership, but they weren't long enough.

After some research I think the high mount termi's came with 10mm spacers & longer bolts for the footplate mounting points, so where can i buy the replacement bolts?

[DesmoTull]

your local home depot?   

[Howie]

http://www.mcmaster.com

[Titus]

I got some 8x1.25-45mm bolts at lowe's, along with nylon sleeves & got a pretty good fit.

But I would still like to get a hold of the correct bolts.

Are there other exhaust companies that use 10mm spacers & longer bolts at the footrest plate mounting points?  maybe I could get a set from one of them?

[Slide Panda]

http://www.bevelheaven.com/productinfo.html

boltdepot.com

[Titus]

http://www.mcmaster.com

cool, I found a few on here that are pretty close

http://www.bevelheaven.com/productinfo.html

was there something in particular on this site you wanted me to see? I looked through everything that might be applicable, but found nothing.

[Titus]

anyone? anyone?

[s4tunate]

anyone? anyone?

Hi Titus,

I am in the exact same situation - I have high mount termi  pipes on my monster and some of the bolts dont bite - did you find an exact match anywhere ?

BEn