I thought I'd relay a quick story and get some opinions to see if this sounds right to you.
My '09 M1100 started having problems a few weeks ago where the turn signals started flashing fast on occasion. I let it go for a few days, figuring that maybe I didn't have enough resistors in the signal circuit with my Rizoma LEDs. The signals start flashing a little more erratically, like fast flashing on the dash but kind of cutting out on the actual signals, and eventually the signals stopped working all together, though the dash continues to flash fast.
I triple checked my wiring, and couldn't find anything amiss, but I wasn't getting any voltage at all on either the right or left signal leads so I asked my dealer to check it out. They report that the problem is deep in the dash, and only a replacement of my dash will fix the problem. Fortunately, this is still under warranty, so it won't cost me a grand to fix, this time. Has anyone else heard of this problem?
The flasher relay circuitry is indeed inside the dash on your bike.
And so the only fix is to completely replace the entire dash assembly?? [bang]
Fanfriggintastic.
Quote from: ungeheuer on November 18, 2010, 11:05:44 PM
And so the only fix is to completely replace the entire dash assembly?? [bang]
Fanfriggintastic.
if its out of warranty like mine you splice into the bikes wiring and fit a standard flasher can
since the PO fitted a electronic can my led blinkers work no probs :D
Quote from: J5 on November 18, 2010, 11:19:05 PM
if its out of warranty like mine you splice into the bikes wiring and fit a standard flasher can
since the PO fitted a electronic can my led blinkers work no probs :D
That will work.
Sorry - been off for a few days and missed these replies.
Glad to hear there's a post-warranty workaround. They scared me a bit when they said it was a complete replacement of the dash....
The dealer is not so wrong since they would need to charge you by the hour and time can add up on a job like this.