Hey guys, What do you guys use to re-route the right timing cover side oil line to the left side? Is there a kit or did you just buy the single aftermarket oil line? If so, what's the length I need to get? Thanks
The lines from Hypermotard 1100 [thumbsup]
New are probably more expensive than an aftermarket single line, but used....
Do I need to replace both lines or Just one?
Just one.
Thanks, You rock!
photo?
Quote from: brad black on December 06, 2014, 06:45:06 PM
photo?
None that show it well :( It just runs along the other line - under and up on the left side. Photos next week if you tell me to.
any chance of a part number ?
Lazy Ute >:( ;)
875.1.136.1A Tubo mandata olio (oil delivery)
I thought you had to buy both, but it seems like one is ok... at $178
Have a sniff on fleabay if your patient you will find some clean ones.
I picked up a set in perfect condition for $50 they usually run at $60-$80
Its a nice mod really cleans up the belt covers and also makes them much easier to remove
for a regular check , get the torque correct or they can weep.
Or just get the Frentubo set for less than one... I'm sure one of our sponsors carries them.
Thanks ..yes lazy !!!
Wow pricey OEM ..yes ebay for sure
I thought the Frentubo set routes same as stock... Do you have a part # for these?
122087H-1-A-A-0mm-Fren Tubo steel/steel Ducati Hypermotard 1100 Oil Radiator Hose Kit, Type 1, CLEAR Sleeves
If you get the set for the right bike... ;)
http://www.pjsparts.com/catalog/product_info.php?products_id=1300 (http://www.pjsparts.com/catalog/product_info.php?products_id=1300)
Quote from: Dirty Duc on December 08, 2014, 07:35:21 PM
122087H-1-A-A-0mm-Fren Tubo steel/steel Ducati Hypermotard 1100 Oil Radiator Hose Kit, Type 1, CLEAR Sleeves
If you get the set for the right bike... ;)
http://www.pjsparts.com/catalog/product_info.php?products_id=1300 (http://www.pjsparts.com/catalog/product_info.php?products_id=1300)
+1, fits perfect, cheaper than buying one OE HM line, looks great and PJ is a good dude.