Re-routing right side oil line on S2R 1000

Started by short circuit, December 04, 2014, 09:56:13 PM

Previous topic - Next topic

short circuit

Hey guys, What do you guys use to re-route the right timing cover side oil line to the left side? Is there a kit or did you just buy the single aftermarket oil line? If so, what's the length I need to get? Thanks

stopintime

The lines from Hypermotard 1100  [thumbsup]

New are probably more expensive than an aftermarket single line, but used....
252,000 km/seventeen years - loving it

short circuit

Do I need to replace both lines or Just one?

stopintime

252,000 km/seventeen years - loving it



stopintime

Quote from: brad black on December 06, 2014, 06:45:06 PM
photo?

None that show it well  :(  It just runs along the other line - under and up on the left side. Photos next week if you tell me to.
252,000 km/seventeen years - loving it

ute


stopintime

Lazy Ute  >:(   ;)  

875.1.136.1A Tubo mandata olio (oil delivery)

I thought you had to buy both, but it seems like one is ok...  at $178
252,000 km/seventeen years - loving it

Two dogs

Have a sniff on fleabay if your patient you will find some clean ones.
I picked up a set in perfect condition for $50 they usually run at $60-$80
Its a nice mod really cleans up the belt covers and also makes them much easier to remove
for a regular check , get the torque correct or they can weep.

Dirty Duc

Or just get the Frentubo set for less than one... I'm sure one of our sponsors carries them.

ute

Thanks ..yes lazy !!!

Wow pricey OEM ..yes ebay for sure

short circuit

I thought the Frentubo set routes same as stock... Do you have a part # for these?

Dirty Duc

#13
122087H-1-A-A-0mm-Fren Tubo steel/steel Ducati Hypermotard 1100 Oil Radiator Hose Kit, Type 1, CLEAR Sleeves

If you get the set for the right bike... ;)

http://www.pjsparts.com/catalog/product_info.php?products_id=1300

Rudemouthsky

Quote from: Dirty Duc on December 08, 2014, 07:35:21 PM
122087H-1-A-A-0mm-Fren Tubo steel/steel Ducati Hypermotard 1100 Oil Radiator Hose Kit, Type 1, CLEAR Sleeves

If you get the set for the right bike... ;)

http://www.pjsparts.com/catalog/product_info.php?products_id=1300

+1, fits perfect, cheaper than buying one OE HM line, looks great and PJ is a good dude.
"while there is a lower class, I am in it, and while there is a criminal element, I am of it, and while there is a soul in prison, I am not free." -Debs