Ducati Monster Forum

I'm usually a succesful googleur, but this is not going anywhere  [bang]

Three of four Termi straps were damaged last year.

Termi: no. Dealer: no.

Suggestions?

(I measure them at 314 mm minus a couple mm gap. ~60 mm between the six holes.)

(http://i329.photobucket.com/albums/l394/stopintime/An%20opportunity/Opportunities%20016_zpsyvoudg35.jpg)

(http://i329.photobucket.com/albums/l394/stopintime/An%20opportunity/Opportunities%20015_zpsjz50gku1.jpg)

 

Someone else needed some and ran into the same problem.  http://www.ducatimonsterforum.org/index.php?topic=72680.msg1339376#msg1339376 (http://www.ducatimonsterforum.org/index.php?topic=72680.msg1339376#msg1339376)
I believe Jeff at Monster parts had a set left over from a warranty claim. Couldn't hurt to ask. :-\

Call M4, he might be able to help.

M4 ?

How about these?

http://www.pjengineering.co.uk/products.php?cat=24 (http://www.pjengineering.co.uk/products.php?cat=24)

http://www.m4exhaust.com/index.html (http://www.m4exhaust.com/index.html)

That should do it.

Already asked - they only have generic ones - not those which look similar  :(




I'll click/call and .....

M4 weren't able to help.

Not PJEngineering either.

 [coffee]

The manufacturers are going by part numbers - even if Arrow could have some that fit, I can't find them without breaking into their warehouse - in Italy.

http://www.eagle-exhaust.com/Stainless-Steel-Reinforcing-Band-round-Black-Velvet (http://www.eagle-exhaust.com/Stainless-Steel-Reinforcing-Band-round-Black-Velvet)

I asked them a question about the measurements - we'll see....

Thanks, interesting link  [thumbsup]

I'll continue hunting Termignoni, or equal, straps with the cut outs and correct hole spacing, but for now I'm ordering these plain straps  [thumbsup]

http://www.ebay.co.uk/itm/Universal-BSAU-Marked-Rivet-Strap-Plain-Strap-4mm-Rivets-Exhaust-Can-400x15-/161507411144?hash=item259a9784c8:g:iCYAAOSw7ThUfz~s (http://www.ebay.co.uk/itm/Universal-BSAU-Marked-Rivet-Strap-Plain-Strap-4mm-Rivets-Exhaust-Can-400x15-/161507411144?hash=item259a9784c8:g:iCYAAOSw7ThUfz~s)

I got some from kerker ( supertrap) when I was looking for replacements for my ferracci forza cans but the spacing was wrong. I ended up reusing the originals. I'd be happy to measure them up and if they work, I could send them your way...

Yes, please do  [thumbsup]

How did these work out?

Ok, I guess... they are closer to mirror/chrome finish than stock and had to be drilled. Not ideal, but ok.

Thanks.

hit them up with a scotch brite pad and you can get a stainless look

My plan was to wait and see if nature would fix them, but now I'll try your suggestion  [thumbsup]

Make sure to only go in one direction. I don't think you'd like a crosshatch. ;)

You don't know that....  Today I like cough syrup with morphine... Tomorrow maybe crosshatch... I'm a hippie now  8)

Nope...I don't know that. I thought that.

Shows you where thought will get you. :P

Knock yourself out.