Steel rivet straps source?

[stopintime]

I'm usually a succesful googleur, but this is not going anywhere 

Three of four Termi straps were damaged last year.

Termi: no. Dealer: no.

Suggestions?

(I measure them at 314 mm minus a couple mm gap. ~60 mm between the six holes.)

[ducpainter]

Someone else needed some and ran into the same problem.  http://www.ducatimonsterforum.org/index.php?topic=72680.msg1339376#msg1339376
I believe Jeff at Monster parts had a set left over from a warranty claim. Couldn't hurt to ask.

[Kopfjager]

Call M4, he might be able to help.

[stopintime]

Call M4, he might be able to help.

M4 ?

[Speeddog]

How about these?

http://www.pjengineering.co.uk/products.php?cat=24

[Kopfjager]

M4 ?

http://www.m4exhaust.com/index.html

[Kopfjager]

How about these?

http://www.pjengineering.co.uk/products.php?cat=24

That should do it.

[stopintime]

How about these?

http://www.pjengineering.co.uk/products.php?cat=24

Already asked - they only have generic ones - not those which look similar 

http://www.m4exhaust.com/index.html

I'll click/call and .....

[stopintime]

M4 weren't able to help.

Not PJEngineering either.



The manufacturers are going by part numbers - even if Arrow could have some that fit, I can't find them without breaking into their warehouse - in Italy.

[Kopfjager]

http://www.eagle-exhaust.com/Stainless-Steel-Reinforcing-Band-round-Black-Velvet

[stopintime]

http://www.eagle-exhaust.com/Stainless-Steel-Reinforcing-Band-round-Black-Velvet

I asked them a question about the measurements - we'll see....

Thanks, interesting link 

[stopintime]

I'll continue hunting Termignoni, or equal, straps with the cut outs and correct hole spacing, but for now I'm ordering these plain straps 

http://www.ebay.co.uk/itm/Universal-BSAU-Marked-Rivet-Strap-Plain-Strap-4mm-Rivets-Exhaust-Can-400x15-/161507411144?hash=item259a9784c8:g:iCYAAOSw7ThUfz~s

[ducriderinct]

I got some from kerker ( supertrap) when I was looking for replacements for my ferracci forza cans but the spacing was wrong. I ended up reusing the originals. I'd be happy to measure them up and if they work, I could send them your way...

[stopintime]

I got some from kerker ( supertrap) when I was looking for replacements for my ferracci forza cans but the spacing was wrong. I ended up reusing the originals. I'd be happy to measure them up and if they work, I could send them your way...

Yes, please do 

[greenohawk69]

I'll continue hunting Termignoni, or equal, straps with the cut outs and correct hole spacing, but for now I'm ordering these plain straps  

http://www.ebay.co.uk/itm/Universal-BSAU-Marked-Rivet-Strap-Plain-Strap-4mm-Rivets-Exhaust-Can-400x15-/161507411144?hash=item259a9784c8:g:iCYAAOSw7ThUfz~s

How did these work out?