Print Page - LED Bulbs

Title: LED Bulbs
Post by: concrete monster on March 07, 2019, 08:19:41 AM

Anyone had luck doing some led bulbs in a stock headlight? 19 Monster 1200s

Title: Re: LED Bulbs
Post by: savetheclutch on March 08, 2019, 06:01:29 AM

I installed these in my Hyper and my friend's 1200s

(https://i.imgur.com/3SdzrsL.jpg)

(https://i.imgur.com/PBwtwaI.jpg)

(https://i.imgur.com/jnjqqoH.jpg)

(https://i.imgur.com/PUnREgu.jpg)

(https://i.imgur.com/z56HIJP.jpg)

Title: Re: LED Bulbs
Post by: concrete monster on March 08, 2019, 06:02:55 AM

So far I've tried two different brands. Problem I'm running into is the heat sink is to big so the housing plate won't fit back on

Title: Re: LED Bulbs
Post by: xcaptainxbloodx on March 08, 2019, 11:49:14 AM

Quote from: concrete monster on March 08, 2019, 06:02:55 AM
So far I've tried two different brands. Problem I'm running into is the heat sink is to big so the housing plate won't fit back on

This has always been the problem for sure. PIAA just released a new bulb with a smaller heat sink called the "G3". there are the usual caveats (resistors might be needed, not CANBUS supported etc) but one cool thing they did is give out this fit chart so you can see if it will fit your housing before you order.

http://www.piaa.com/Shared/product-images/line-art/piaa-g3-led-lineart-hr.jpg (http://www.piaa.com/Shared/product-images/line-art/piaa-g3-led-lineart-hr.jpg)

Title: Re: LED Bulbs
Post by: NAKID on March 08, 2019, 10:41:09 PM

Opt7 Flux beam X. Fantastic headlight and fits in the stock housing with a little effort. I have it on my Monster 821.

Title: Re: LED Bulbs
Post by: concrete monster on March 09, 2019, 02:09:39 AM

Quote from: NAKID on March 08, 2019, 10:41:09 PM
Opt7 Flux beam X. Fantastic headlight and fits in the stock housing with a little effort. I have it on my Monster 821.

What year is your 821? And do you have any pics ?

Title: Re: LED Bulbs
Post by: NAKID on March 13, 2019, 10:20:02 PM

Quote from: concrete monster on March 09, 2019, 02:09:39 AM
What year is your 821? And do you have any pics ?

2015
(https://i1153.photobucket.com/albums/p513/NAKID1/image1_zpsc3ykuioy.jpeg) (https://s1153.photobucket.com/user/NAKID1/media/image1_zpsc3ykuioy.jpeg.html)
Phillips Low Beam
(http://i1153.photobucket.com/albums/p513/NAKID1/image2_zpsleqmcbru.jpeg) (http://s1153.photobucket.com/user/NAKID1/media/image2_zpsleqmcbru.jpeg.html)
Phillips High Beam
(http://i1153.photobucket.com/albums/p513/NAKID1/image3_zpsyyc6caa6.jpeg) (http://s1153.photobucket.com/user/NAKID1/media/image3_zpsyyc6caa6.jpeg.html)
Opt 7 Low Beam
(http://i1153.photobucket.com/albums/p513/NAKID1/image4_zpsarn74lpx.jpeg) (http://s1153.photobucket.com/user/NAKID1/media/image4_zpsarn74lpx.jpeg.html)
Opt 7 High Beam

Ducati Monster Forum

Moto Board => Accessories & Mods => Topic started by: concrete monster on March 07, 2019, 08:19:41 AM