I picked an S*R kickstand to replace my bent stock one. Of course, the kickstand then touched the exhaust header in its retracted position. So I fabricated a stop to keep the stand from going up that last 1/4" inch and reasting on the pipe. I used a block on nylon, drilled and tapped the back side of the kick stand mount and attached with a small screw. Thought I would share for anyone wishing to use an S*R stand on an older Monster.
Outside of stand showing spacer
![](http://farm4.static.flickr.com/3664/3498805472_dc894e7f0f.jpg)
Back side of stand showing attachment of spacer
![](http://farm4.static.flickr.com/3311/3498000245_6e9e3c4532.jpg)
On the bike. barely noticeable, and just a little space between the stand and pipe
![](http://farm4.static.flickr.com/3631/3498815350_e9835c8ae3_b.jpg)