Doing some rewiring... Supplies & Suggestions

[Kopfjäger]

"If the motorcycle is equipped with a side stand; a vertical mounting direction is recommended. This means the output terminal shows to up- side and the m-Units topside shows in direction side stand. The alarm will be triggered if the Motorcycle will be moved from the side stand in upright position."

Mounting vertically detracts from this.  Do you have one?  How is it mounted?

Also:  "No push or pull force should act to the device. Area of Installation must be protected from spray water and 30cm away from hot engine or exhaust parts. Maximum ambient temperature must not exceed +80°C or go below -20°C."

It is being installed now. Part of phase 10 of my build.    I will let you know the outcome. Oh, what's an alarm. 

[Tsugaro]

ditch your lead-acid battery & you'll have enough room...

What would you recommend? I have a '98 M900, and am having no luck finding a replacement battery that isn't lead-acid. I already had the vent tube come off and cause some awesome damage on my engine cover, so I would rather that not happen again.

Sorry for the thread hi-jack.

[junior varsity]

If you've got the coin, SpeedCell.

[junior varsity]

By the way. Dean's Wire (I've played with some of the Wet Noodle Variety recently) - its really fantastic.