Main Menu

LED turn signal resistors

Started by ungeheuer, October 07, 2010, 05:05:36 AM

Previous topic - Next topic
Print
Go Down Pages 1 2
User actions

ducpainter

#15
October 11, 2010, 08:28:07 AM
Is the flasher relay still built in to the gauges?

If so, wouldn't a bunch of re-wiring be necessary to eliminate that one?
"Once you accept that a child on the autistic spectrum experiences the world in
 a completely different way than you, you will be open to understand how that
 perspective
    is even more amazing than yours."
    To realize the value of nine  months:
    Ask a mother who gave birth to a stillborn.
"Don't piss off old people The older we get, the less 'Life in Prison' is a deterrent."


koko64

#16
October 11, 2010, 02:48:54 PM
And therefore not as simple as replacing the flasher on an older model. Probably not enough room in the gauge to swap to the LED unit as it's about 20 by 40mm.
2015 Scrambler 800

ungeheuer

#17
October 11, 2010, 04:57:33 PM
Meh... why complicate things with replacement flasher modules?  Cheap, simple little resistors work well and are easy enough to find a home for.

My point was merely that they do get surprisingly hot when under load and so its probably prudent to mount them accordingly  :)
Ducati 1100S Monster + Ducati 1260S Multistrada + Moto Guzzi Griso 1200SE

Previously: Ducati1200SMultistradaDucatiMonster696DucatiSD900MotoMorini31/2
Print
Go Up Pages 1 2
User actions