04 Monster 620 spring preload tool, bar end removal

[electricpete]

Two questions:
What tool is used to adjust the rear spring preload?
How are the black plastic bar ends removed (replacing bent handlebar...)?
Thanks.

Peter

[d3vi@nt]

Universal spanner wrench for the rear spring preload. Should be able to pick one up at any local moto shop.

Plastic bar-end plugs should wiggle out with pliers and patient persuasion. Might put cloth/rag over the plugs if you don't want to mar them. And/or pry gently with a small flat screwdriver.

Good luck.

[the_Journeyman]

I picked up a double-ended preload spanner at my Cycle Gear for like $15US.  It works fine on my M750 and the Honda Hawk.  It is double ended for two different sizes, but I've not had a use for the smaller size yet.  Maybe on some 250s or some dual sports or dirt bikes it'll work.

JM