M900 Ducati performance dash kit with full size tach help needed

[ducriderinct]

Does anyone have an install sheet or possibly a link to an installation instruction write up for this? This is the kit that has the full-size tachometer with the aluminum face that houses the idiot lights. I have it listed on the receipt as part number F77050 by fast by ferracci. I believe it is a kit made by roadracing but am not entirely sure.

I guess my question is, can I simply plug this gauge cluster kit into the existing M900 wiring harness or do I need to re-pin the connector/reuse the wiring harness from the bike that the gauge cluster was previously mounted in?

Both bikes are 1996 M900's

[koko64]

Would you show the back of the gauges and wiring connectors?

[ducriderinct]

After some further research, it seems that this is the road racing kit, with a Ducati performance tachometer and not a Ducati performance kit.

It has the same connections as the stock cluster. Metal twist lock in hoe bottom center and a speedo cable connection. I can get a photo and post it up.


Sent from my iPad using Tapatalk

[koko64]

Likely plug n play except for the extra loom part of the tacho kit. Probably runs some wires to the ignitors.

[greenmonster]

It is plug and play.
IIRC, you have to transfer the idiot bulbs.
And the tach is connected to one of the ignition modules.