Installed Exhaust and Bike Wont Start... HELP !!!!

[jerryj20]

Seriously guys, im new at this bike thing,   i looked for a connection and couldnt find it anywhere,  and you say the other end should connect up towards the ECU?

[ducpainter]

It actually enters a harness, tells the bulb and the ecu the bike is in neutral.

It does come from above.

It's there somewhere.

[jerryj20]

Thanks,  also if the bike start via push start, does that mean that the ECU is good?

[invisible monster]

Tried everything and the bike just wont start.  I decided to push start it and it started. My ? is I assume ill take it to the dealer so is there any harm in me push starting it and riding it to the dealer?  Will it hurt anything?

If the ecu was no good the bike would not run.  

If you locate the wire that goes to the neutral switch and plug it in I think your problem will be solved.

[jerryj20]

Thanks Invisible,  last night when i push started the bike i had the old or OG ECU in it,  I will put the one you sent me back in it tonight, and try to start it and also try to find that wire that plugs in.  Thanks again

[jerryj20]

BINGO..... It was the Neutral switch, I found where it fell off,  wasnt on tight enuff i guess.  And to think all this headache for one wire. O well,  good to learn about the bike,  thanks for all the help guys.....  And this exhaust makes this sound like a whole new bike   10xs the stock......

[invisible monster]

Excellent, glad to hear you got it running.

Enjoy it.

[jerryj20]

Invisible, i tried to call you a sec ago....  I have a few ?s about running the exhaust in a different, would you give me a call when you can. thanks