How to core 696 pipes (thanks to ryanracer)

[mitt]

How to core your pipes on a Ducati Monster 696

Step 1


Step 2




Step3

[u


Step 4


Step 5
Copied and pasted from this thread

http://ducatimonsterforum.org/index.php?topic=17976.msg0#new






Here is the sound comparison of STOCK vs. CORED

http://members.cox.net/hcompetition/CoredvsStock.mp3

[WetDuc]

As a quick addition to this great tutorial, I wanted to point out that there is an alternative way of getting the sleeve off the left can.
I used a steel tube about 5 ft long, just smaller in diameter than the inlet of the can and then immobilized the can (bench vise, under something heavy, etc) and gently used the steel tube as a lever to bend the inlet pipe more straightened until the sleeve could clear and slide off.  The same method was used to re-bend the inlet pipe once the core/chop was done and the sleeve was back on.
No cutting, took 30 seconds and worked great.

[Goju]

Hi, I have a spare set of 696 cans I would like to core, does anyone still have the pictures for this process, they are not showing in this thread, cheers David