Need help getting to idle screws

[EEL]

I know where they are but they have this weird cap on them. How the hell do you get them off!! . They're plastic and completely seal the opening. There's not even enough space to jam a screwdriver in there.

I have an 05 S2R 800..

Thanks in advance.

[Howie]

Are you asking about the air bleeds?  Never seen those caps, but this should work.  Drill through the caps, but be careful not to hit the screws.  A hose on the drill bit to limit depth will help.  Then look for a tool with a hook that will fit in the hole and pull the caps out.

[tcspeedfreak]

left handed drill bit to get through the caps that way if you do hit the screw it just backs out, instead of getting pushed in further and possible damage,  i believe those caps are EPA caps not supposed to be messing with things underneath the caps but then again who cares what the EPA wants us to do anyway

[EEL]

Yeah, I was thinking drill bit too. I was keeping it as a last resort and hoping for a more "humane" solution. I need to sych the throttle bodies so I have no option but to remove them.

[Speeddog]

A light tap on a screwdriver at an angle will break the front of the cap, then you can pry it out.

[ICON]

Get one of those Dentist type picks and take that cap off. That's what I did. I worked it from the side until it popped off. HomeDepot sells them.

[EEL]

Got them off. Thanks guys. Needless to say they didnt come off without a fight or in one piece (a shard almost flew right into my eye  ). I can start syncing now.

Thanks for the advice.