NO GAUGES, NEW Clip-ONs..... SO SEXY!!!!

abbottstjumper · July 14, 2009, 12:19:47 PM

OK so now that the bike is running well (not great, but i'll let the pros tune her in) I finished up most of the details!!!

Let me know what you think!! I'm saving the full tail elimination for after she gets inspected!!!

Below is my new speedometer, no wires, no magnets.... GPS

Takster · July 14, 2009, 12:32:46 PM

Hell yeah!

Looking good man.

Did you manage to figure out how to put the indicator lights in a little box like you were talking about?

~T

abbottstjumper · July 14, 2009, 12:36:54 PM

YUP, if you noticed they are tucked in with the air box!! Looks really clean, I'm also working on making custim lights for the back from some High intensity LEDs I have.

Takster · July 14, 2009, 12:38:55 PM

that's awesome.

...it only goes up to 70 though.

lwszabo · July 14, 2009, 01:01:20 PM

hey! you stole my bike!!! Looks good what year? (95?)

Mike Qube · July 14, 2009, 01:14:58 PM

Did you recently buy your monster from a guy in worcester, ma? I looked at one that had that same headlight on it maybe a month or so ago.

teddy037.2 · July 14, 2009, 01:16:17 PM

dig the headlight

abbottstjumper · July 14, 2009, 01:41:51 PM

It's a 95 and got it about 3 weeks ago (worcester), had a lot of work just to get her running, but well worth it. Good thing I can do most of the work myself.

Popeye the Sailor · July 14, 2009, 02:16:36 PM

Weird. I'm from Worcester, Ma.

NAKID · July 14, 2009, 02:38:02 PM

Well, I like how the top triple area is devoid of a gauge cluster but I have to say, not a fan of the headlight. Maybe if it didn't stick out so far...

Mike Qube · July 14, 2009, 02:40:25 PM

Quote from: abbottstjumper on July 14, 2009, 01:41:51 PM
It's a 95 and got it about 3 weeks ago (worcester), had a lot of work just to get her running, but well worth it. Good thing I can do most of the work myself.

That must be the same one that I tested out. The guy lived in a garage.?
It needed a bit more than what I was willing to do, from what I could tell with my very limited technical knowledge.
What did it end up needing in the end?

abbottstjumper · July 14, 2009, 03:20:38 PM

Rebuilt the carbs, new jets, gaskets and so on. I also replaced all fuel lines and filters as well as re synched the carbs and replaced all the belts, I still need to adjust all the valves but other then that I think it's all good.

As far as mods go, New Apex Clip Ons, new clutch cover, pressure plate, GPS Speedo, new bolts and misc hardware.

Mike Qube · July 14, 2009, 03:37:16 PM

Quote from: abbottstjumper on July 14, 2009, 03:20:38 PM
Rebuilt the carbs, new jets, gaskets and so on. I also replaced all fuel lines and filters as well as re synched the carbs and replaced all the belts, I still need to adjust all the valves but other then that I think it's all good.

As far as mods go, New Apex Clip Ons, new clutch cover, pressure plate, GPS Speedo, new bolts and misc hardware.

Thats a good amount of work you did there. It's good to see it looking so nice.
If you're looking to replace that headlight, I just replaced the stock one on my 97 M750, and the stock is sitting on a shelf now.

abbottstjumper · July 14, 2009, 03:53:12 PM

The headlight is my favorite item on the bike, that and the GPS based speedo!!!

Mike Qube · July 14, 2009, 04:03:02 PM

Quote from: abbottstjumper on July 14, 2009, 03:53:12 PM
The headlight is my favorite item on the bike, that and the GPS based speedo!!!

Did the speedo that was on it have a tach? I'm in the market right now for a speedo/tach unit.

News:

NO GAUGES, NEW Clip-ONs..... SO SEXY!!!!

teddy037.2