rearstand didnt work

[JEDI PIMP]

Will a 1098 rearstand work on a 2006 S2R?
Got a line on one and just want to check it out first.
It is the grey ducati made stand.
Thanks in advance.
   Alex

[NAKID]

Yup, same thing...

[JEDI PIMP]

easy as pie.

and thank you.

[Grampa]

depends



some of  the 1098's have a larger pin.... some are the small pin

[NAKID]

Depends on what side they go on. The open wheel side uses a larger pin than the swingarm side, just like the S*R...

[fastwin]

Depends on what side they go on. The open wheel side uses a larger pin than the swingarm side, just like the S*R...

I like Pit Bull stands but the posts about pin size difference are correct.

http://www.pit-bull.com/Merchant2/merchant.mvc?Screen=PROD&Store_Code=PBMSA&Product_Code=F0027C-000&Category_Code=one_armed_rear_stands


Reversible model.

http://www.pit-bull.com/Merchant2/merchant.mvc?Screen=PROD&Store_Code=PBMSA&Product_Code=F0027B-000&Category_Code=one_armed_rear_stands

[JEDI PIMP]

Bought it and it will not fit.
Its Ducati Part Number 96757207BA
The pin is too large.
Shit. anyone with a 1098 need a stand?

[Triple J]

I wish I'd have seen this yesterday.  The 1098/1198 pin is larger...the 848 is the same as all other Ducati SSS models.

[NAKID]

I don't see how the 848 and the 1098 are different pin sizes. Everything I have read says they are the same. The stand I have is a reversible and has 2 pins. One for the wheel side and one for the swingarm side...

[DarkStaR]

Bought it and it will not fit.
Its Ducati Part Number 96757207BA
The pin is too large.
Shit. anyone with a 1098 need a stand?

Sorry dude.

That's what I was thinking when i read this thread, but i wasn't 100% positive, so I didn't say anything.  

I think the 1098 uses the same stand as the MVs = LARGE PIN.

What stand is it?  Can you just change the pin to the correct one?

[DarkStaR]

I don't see how the 848 and the 1098 are different pin sizes. Everything I have read says they are the same. The stand I have is a reversible and has 2 pins. One for the wheel side and one for the swingarm side...

They're different.  Checkout the rear sprocket carriers.  The 848 is using the cast 5 bolt carrier like the s#r, and the 1098 is using the fancy billet 6 bolt carrier.

Also, if you shop for rear axle sliders (e.g. speedymoto), the 1098 has a part number all it's own.

[Triple J]

I don't see how the 848 and the 1098 are different pin sizes. Everything I have read says they are the same. The stand I have is a reversible and has 2 pins. One for the wheel side and one for the swingarm side...

They are...take a trip to your local Duc dealer.

[NAKID]

Bought it and it will not fit.
Its Ducati Part Number 96757207BA
The pin is too large.
Shit. anyone with a 1098 need a stand?

Is it a removable pin? If so, you should just be able to get the proper pin.

Sorry man, I swore they were the same...

[JEDI PIMP]

  its cool.
Ill call them on tuesday and see if they can order me the correct pin. I still probly wont be over 100 bucks into it after i buy the pin.
Ive got a buddy who will put the pin on his laith if I cant buy one. I will make it work!!

[mitt]

its cool.
Ill call them on tuesday and see if they can order me the correct pin. I still probly wont be over 100 bucks into it after i buy the pin.
Ive got a buddy who will put the pin on his laith if I cant buy one. I will make it work!!

I was just going to recommend having a favor done and machining it down.

mitt