Another swatt clip on question

[goldFiSh]

Does anyone know whether the swatt 2.5" or 3.5" rise clip ons will work mounted below a stock monster top triple? I've seen the threads by stopintime and ungeheuer about using swaps with speedymoto triples 9and the issues with reversing things, and spacing coffin masters) but have not found the answer.

I'm looking to bore and finish the stock triple kinda like the finish duck-stew got on spideys M1000SS.
Will it work, or will the bolts for the triple interfere with the clip ons risers?

Cheers

[dinenoj]

My 2.5" Swatts fit perfect with the stock top triple on my S2R1000.
No "reversing" necessary on the new design.

[stopintime]

So, now suddenly you don't need me anymore   

[dinenoj]

 Stopintime, we all need your wisdom from time to time.
I've been quietly building my knowledge base through many of your posts.

[Raux]

i'll need you and your euro for the wine in June.

[goldFiSh]

My 2.5" Swatts fit perfect with the stock top triple on my S2R1000.
No "reversing" necessary on the new design.

Excellent, the stock triple will work. One final question, how much lower than stock is the setup with the 2.5" risers, mounting under the stock triple?

[dinenoj]

Do a search under "SWATT clip-ons" and you will find much info, mostly from Stopintime's install which was very helpful.
I believe it's about a 3.5" drop but with a swept back angle that feels really nice on the wrists. Look it up, a lot of info there.
I do have a photo somewhere that has the Swatt clip-ons and the stock Magura bars on at the same time, for I wanted to do a comparison.

[stopintime]

Excellent, the stock triple will work. One final question, how much lower than stock is the setup with the 2.5" risers, mounting under the stock triple?

Jippi - I'm in again

Do a search under "SWATT clip-ons" and you will find much info, mostly from Stopintime's install which was very helpful.
I believe it's about a 3.5" drop but with a swept back angle that feels really nice on the wrists. Look it up, a lot of info there.
I do have a photo somewhere that has the Swatt clip-ons and the stock Magura bars on at the same time, for I wanted to do a comparison.

, just in time to find that I was too late 

  My Swatt 3.5" vs stock measurement was about two inches lower. It's about the same result as Dinenoj's.
It would be great to see that picture

[stopintime]

i'll need you and your euro for the wine in June.

I'm very determined to make it to WDW 

[goldFiSh]

thanks all!

[mookieo2]

I have 1.5" mounted below the top triple as well they fit fine.

[stopintime]

I have 1.5" mounted below the top triple as well they fit fine.

, but do you have the bulkiest top part of the riser facing front or rear?

[geoffduc]

I'm very determined to make it to WDW 

Under no pressure then??   

  it's tea really Lars, oh! with milk and one sugar 

[stopintime]

Under no pressure then??   

  it's tea really Lars, oh! with milk and one sugar 

No pressure at all 

My Swatt clip ons will travel about 3,800 miles during this epic WDW adventure.
Tea will not be enough, I'm sure

 

[geoffduc]

Good man     

We'll have a great time,  just make sure you arrive safe and sound  [moto] [moto]