US voltage?

Started by stopintime, February 14, 2010, 12:01:59 PM

Previous topic - Next topic

stopintime

I'm hoping to get a GoPro camera when they offer it with the LCD screen option.

They offer a wall charger which I assume fits US.

What's the voltage stateside?
268,000 km/eighteen years - loving it

Kopfjäger

Woohoohoohoo! Two personal records! For breath holding and number of sharks shot in the face.

Raux

Quote from: stopintime on February 14, 2010, 12:01:59 PM
I'm hoping to get a GoPro camera when they offer it with the LCD screen option.

They offer a wall charger which I assume fits US.

What's the voltage stateside?

110v

you can find out what voltage/amperage required for the charger and get a generic one here in Europe. I do it with a lot of my equipment.


MotoCreations


Standard household for USA, Mexico and Western Japan: 110V (110-127V) at 60hz  

caution though --> some places in Japan still have 110V @50Hz -- it's a big mess to be honest between the two ratings in their county.

Dryer, stove, heater and commercial: USA, Mexico, Phillipines: 220V (220-240V) at 60Hz

Most all of Europe / Africa and OZ is 220V (220-240V) at 50Hz   (thus major appliances aren't swappable or worth transporting with USA)







JEFF_H

and a lot of power adapters will work with either 110 or 220 with just an plug adapter


Kopfjäger

Quote from: MotoCreations on February 14, 2010, 12:18:22 PM
Standard household for USA, Mexico and Western Japan: 110V (110-127V) at 60hz  

caution though --> some places in Japan still have 110V @50Hz -- it's a big mess to be honest between the two ratings in their county.

Dryer, stove, heater and commercial: USA, Mexico, Phillipines: 220V (220-240V) at 60Hz

Most all of Europe / Africa and OZ is 220V (220-240V) at 50Hz   (thus major appliances aren't swappable or worth transporting with USA)








Was unaware Europe, Africa, Mexico, Japan and OZ were stateside.  :D
Woohoohoohoo! Two personal records! For breath holding and number of sharks shot in the face.

stopintime

So, the easiest solution is a 220V 50hz ----- 110V 60hz adapter?

Or look for a USB specific wall charger which deliver x amp/voltage?
268,000 km/eighteen years - loving it

1KDS

You have 100v 50hz i would guess, and the US is 110v 60hz.  Often with these small chargers they are 50/60hz if you can get the specs of the charger it could work for you without adapter.  Do your receptacles look like this?

             neutral   |  |   hot
                            .     ground
Every bike I've ever owned.

mitt

It should be 120V 60Hz.  I am not sure why people say 110.


mitt

stopintime

Quote from: 1KDS on February 14, 2010, 12:44:23 PM
You have 100v 50hz i would guess, and the US is 110v 60hz.  Often with these small chargers they are 50/60hz if you can get the specs of the charger it could work for you without adapter.  Do your receptacles look like this?

             neutral   |  |   hot
                            .     ground

220 - 240 is the usual description - I guess it fluctuates.
From what I read the last hour, the 50/60hz isn't critical for my purpose.

"recepticals" that sounds dirty [cheeky]

We have two basic choices: without ground is just two pins from a very thin plug OR grounded, which is bigger and round, including two ground connecting pieces on either side. Not possible to put a grounded appliance in a non-grounded socket.
268,000 km/eighteen years - loving it

derby

Quote from: mitt on February 14, 2010, 01:09:17 PM
It should be 120V 60Hz.  I am not sure why people say 110.


mitt

because 110 is half of 220.
-- derby

'07 Suz GSX-R750

Retired rides: '05 Duc Monster S4R, '99 Yam YZF-R1, '98 Hon CBR600F3, '97 Suz GSX-R750, '96 Hon CBR600F3, '94 Hon CBR600F2, '91 Hon Hawk GT, '91 Yam YSR-50, '87 Yam YSR-50

click here for info about my avatar

1KDS

Quote from: mitt on February 14, 2010, 01:09:17 PM
It should be 120V 60Hz.  I am not sure why people say 110.
Generally 110v to 120v is acceptable and 208v to 240v is acceptable.  Nameplates say anything in that range.  If you were to put a meter in one of your receptacles it would probably read something like 117.4v for example.
Every bike I've ever owned.

1KDS

Quote from: stopintime on February 14, 2010, 01:34:59 PM
220 - 240 is the usual description - I guess it fluctuates.
From what I read the last hour, the 50/60hz isn't critical for my purpose.

"recepticals" that sounds dirty [cheeky]

We have two basic choices: without ground is just two pins from a very thin plug OR grounded, which is bigger and round, including two ground connecting pieces on either side. Not possible to put a grounded appliance in a non-grounded socket.

I guess I'm not sure what those look like.  If you put 220-240v into a 110-120v appliance regardless of frequency it will end with smoke.  So you're saying your small appliances in your house and your country like an alarm clock for example are 220v?
Every bike I've ever owned.

mitt

Quote from: derby on February 14, 2010, 01:45:05 PM
because 110 is half of 220.

Yes, but 220 is wrong also.

120 is half of 240, which is target the utility is trying to hit at each house.


mitt

Kopfjäger

Just plug shit in until it works.  :D
Woohoohoohoo! Two personal records! For breath holding and number of sharks shot in the face.