Main Menu

output shaft endfloat

Started by spook, April 16, 2010, 02:46:30 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

spook

April 16, 2010, 02:46:30 PM
this morning I dusted of my 95 monster and checked it over and noticed that the output shaft has small amount of endfloat (not sprocket on shaft). Is this something to worry about and how much endfloat is acceptable.

Any help would be appreciated.

Cheers, Spook

ducpainter

#1
April 16, 2010, 02:50:24 PM
pm ducvet...he'll know.
"Once you accept that a child on the autistic spectrum experiences the world in
 a completely different way than you, you will be open to understand how that
 perspective
    is even more amazing than yours."
    To realize the value of nine  months:
    Ask a mother who gave birth to a stillborn.
"Don't piss off old people The older we get, the less 'Life in Prison' is a deterrent."


greenmonster

#2
April 17, 2010, 06:53:20 AM
Around 0.10mm is normal & nothing to worry about.  [thumbsup]
M900 -97 
MTS 1100s  -07

spook

#3
April 17, 2010, 12:19:29 PM
Have just measured the endfloat and is about .5mm or 20thou, has no axial play and bearing feels smooth. was concerned that somethibg was flogged out.

Cheers, Spook
Print
Go Up Pages1
User actions