Clever Safety Device-Amazing!

Started by orangelion03, May 13, 2010, 11:26:38 AM

Previous topic - Next topic

mitt

Quote from: hihhs on May 13, 2010, 05:42:14 PM

Side note- according to an article I read recently the two most dangerous tools statistically are the razor knife and the ladder. Go figure.

I believe that.  We can't use locking utility knifes anymore at work, they have to be self retracting.  The self retracting are far more dangerous in my opinion because they make the cutting work so much harder to do.

mitt

DesmoDiva

There are two of those in the wood shop at school.

The stopping devices have had to be replaced a couple times.  ie. saved a couple of over tired, architecture students fingers.

Once it tripped for a nail in a piece of scrap.

IIRC, it is a few hundred dollars to replace the brake.  Not cheap, but cheaper than a lawsuit or losing a finger.

Mitt, there is no ground tether.
'01 ST4 Yellow
'02 ST4s Yellow

mitt

Quote from: DesmoDiva on May 13, 2010, 05:49:42 PM

Mitt, there is no ground tether.

Hmm, I will have to do some research to know how it can sense a change in resistance between wood and a well isolated mammal wearing boot quality work boots. 

mitt

DesmoDiva

It was explained to me that it detects an electromagnetic change in material, not necessarily resistance.
'01 ST4 Yellow
'02 ST4s Yellow

Buckethead

Quote from: mitt on May 13, 2010, 05:54:25 PM
Hmm, I will have to do some research to know how it can sense a change in resistance between wood and a well isolated mammal wearing boot quality work boots. 

mitt

Humans make good capacitors.  [thumbsup]
Quote from: Jester on April 11, 2013, 07:29:35 AM
I can't wait until Marquez gets on his level and makes Jorge trip on his tampon string. 

mitt

I did a little reading on their website, and I think I understand what is happening.  It uses the body's natural capacitance to create a dip in a weak voltage that is applied to the blade and sampled at a high frequency.

Not the body's resistance that would cause a current leak like I originally thought.  That would take too high a voltage to drive the leak and could be over ridden by someone wearing electrical safety shoes.

I am still very impressed at the system from both a mechanical and electronic standpoint.

mitt

Buckethead

Quote from: Jester on April 11, 2013, 07:29:35 AM
I can't wait until Marquez gets on his level and makes Jorge trip on his tampon string. 

mitt

Quote from: Obsessed? on May 13, 2010, 06:19:33 PM
Haha!

32 seconds.

even less, because by the time I had typed and hit post, I got a warning, someone else had posted message, so really more like 20  ;D


mitt

brimo

"The make the beast with two backsin monkey started it..."

From a story by RAT900
http://www.ducatimonsterforum.org/index.php?topic=54722.msg1015917#msg1015917

He Man

assume you had a hammer that mimic the properties of human flesh so that this device triggers.

also assume the device is reloadable instantly.

Inamgine playing wackamole with this thing.

Speeddog

Quote from: DesmoDiva on May 13, 2010, 05:49:42 PM
~SNIP~

IIRC, it is a few hundred dollars to replace the brake.  Not cheap, but cheaper than a lawsuit or losing a finger.

~SNIP~

I spent ~$400 at an Urgent Care to get 4 stitches on a lacerated knuckle.
(Work on motorcycles for a living and I get wounded washing a glass  [roll])
I don't think you can get to a bed in an ER for a few hundred, let alone get any treatment.

I'm pretty sure that fingers that are cut off with a rotary saw aren't easily reattached.
Perhaps someone here knows...
- - - - - Valley Desmo Service - - - - -
Reseda, CA

(951) 640-8908


~~~ "We've rearranged the deck chairs, refilled the champagne glasses, and the band sounds great. This is fine." - Alberto Puig ~~~

hihhs

#26
Quote from: Speeddog on May 13, 2010, 08:28:24 PM
~SNIP~
I'm pretty sure that fingers that are cut off with a rotary saw aren't easily reattached.
Perhaps someone here knows...
~SNIP~

The guy that was injured on my job-site(previous post) had one of three fingers successfully reattached & has very limited use of the of "saved" finger. Not to get too graphic but the saw blade destroyed the fingers. It was not a "clean cut".

Monster 1100

erkishhorde

I taught the shop class for the first year college of Architecture students for a few quarters while doing my master's classes. Got to talk with the shop manager a lot. I'll echo DD on saying that it's a few hundred dollars and not $60 like what the video says. It works great though. It often gets set off by soggy wood and nails and pisses the hell out of the shop manager. I think it's only actually been set off by a finger like twice in the last 5 years. But if you think about it, it's like insurance. You pay for the false alarms all the time like paying a premium for insurance and then when the real deal comes you don't get your ass sued off by some angry parents.

Even though these kids are taught the right way to use the equipment, most of them are still afraid of it and will do stupid shit. And as said before, even a pro gets a little careless when doing repetitive work.
ErkZ NOT in SLO w/ his '95 m900!
The end is in sight! Gotta buckle down and get to work!

Speeddog

That was what I recalled from a real ER TV episode.

They showed the X-rays of some fingers that got Skilsawed.  :'(
- - - - - Valley Desmo Service - - - - -
Reseda, CA

(951) 640-8908


~~~ "We've rearranged the deck chairs, refilled the champagne glasses, and the band sounds great. This is fine." - Alberto Puig ~~~

Grampa

fyi.... a severed finger will get ya like a grand from AFLAC  ;D


thats like a free Termi slip on system
Gaspar, Melchior and Balthasar kicked me out of the band..... they said I didnt fit the image they were trying to project. 

So I went solo.  -Me

Some people call 911..... some people are 911
-Marcus Luttrell