Main Menu

Machinst help: pins for spanner

Started by DucHead, June 04, 2010, 03:28:38 AM

Previous topic - Next topic
Print
Go Down Pages1
User actions

DucHead

June 04, 2010, 03:28:38 AM
Could someone with machining skills make two of these from steel:


I need them for a pin spanner to hold the starter clutch on my Bandit.

Obviously, I'd pay for your time, materials and postage.

PM me if you're interested.
'05 S4R (>47k mi); '04 Bandit 1200 (>92k mi; sold); '02 Bandit 1200 (>11k mi); '97 Bandit 1200 (2k mi); '13 FJR1300 (1k mi); IBA #28454 "45"

monsta

#1
June 04, 2010, 04:43:59 AM
I'd do it, but I dont think you'd want to pay freight from Australia...

Can I make a sugestion?  ..  I will anyhow...   :)

machine from a 10mm capscrew, but leave the head on the scew so that its easy to fit and remove. It'll also gove a bit of support for the pin..
93 M900 - 07 ST3 - 00 748s trackbike - 78 900SS - 13 848 EVO Corse SE

DucHead

#2
June 04, 2010, 04:55:20 AM
Quote from: monsta on June 04, 2010, 04:43:59 AM
I'd do it, but I dont think you'd want to pay freight from Australia...

Can I make a sugestion?  ..  I will anyhow...   :)

machine from a 10mm capscrew, but leave the head on the scew so that its easy to fit and remove. It'll also gove a bit of support for the pin..

LOL, I already have the cap head bolts!!  I just don't have a metal lathe.
'05 S4R (>47k mi); '04 Bandit 1200 (>92k mi; sold); '02 Bandit 1200 (>11k mi); '97 Bandit 1200 (2k mi); '13 FJR1300 (1k mi); IBA #28454 "45"

ducpainter

#3
June 04, 2010, 06:00:35 AM
Quote from: pompetta on June 04, 2010, 04:55:20 AM
LOL, I already have the cap head bolts!!  I just don't have a metal lathe.
How accurate do they need to be?

Do you have a bench grinder?
"Once you accept that a child on the autistic spectrum experiences the world in
 a completely different way than you, you will be open to understand how that
 perspective
    is even more amazing than yours."
    To realize the value of nine  months:
    Ask a mother who gave birth to a stillborn.
"Don't piss off old people The older we get, the less 'Life in Prison' is a deterrent."


DucHead

#4
June 04, 2010, 06:13:17 AM
Quote from: ducpainter on June 04, 2010, 06:00:35 AM
How accurate do they need to be?

Do you have a bench grinder?

Reasonably accurate -- I don't wanna f-up my starter clutch.

It's be worth $40 or so to have nice looking ones, but I might give the bench grinder idea a shot.
'05 S4R (>47k mi); '04 Bandit 1200 (>92k mi; sold); '02 Bandit 1200 (>11k mi); '97 Bandit 1200 (2k mi); '13 FJR1300 (1k mi); IBA #28454 "45"

ducpainter

#5
June 04, 2010, 05:29:52 PM
Quote from: pompetta on June 04, 2010, 06:13:17 AM
Reasonably accurate -- I don't wanna f-up my starter clutch.

It's be worth $40 or so to have nice looking ones, but I might give the bench grinder idea a shot.
There's a fair spread between lathe accurate...

and make the beast with two backsing up your starter clutch.

Just sayin' ;D
"Once you accept that a child on the autistic spectrum experiences the world in
 a completely different way than you, you will be open to understand how that
 perspective
    is even more amazing than yours."
    To realize the value of nine  months:
    Ask a mother who gave birth to a stillborn.
"Don't piss off old people The older we get, the less 'Life in Prison' is a deterrent."


alibaba

#6
June 04, 2010, 08:37:59 PM
Obtain a 2" long bolt - chuck up the threaded end in a hand drill - or better yet a drill press if available - apply a file to the section you want to cut down - use a hack saw to cut off what you don't want - not precision work but closer than a bench grinder though not as fast.

jim_0068

#7
June 05, 2010, 06:56:58 AM
PM some dude, he recently did some machine work for me for a fork swap.

DucHead

#8
June 15, 2010, 03:58:55 AM
I have an update that'll bring this thread to a happy conclusion.   [moto]

I got a PM, and then several of these appeared in the mail:


...to do this:


Thanks SP3!!!
'05 S4R (>47k mi); '04 Bandit 1200 (>92k mi; sold); '02 Bandit 1200 (>11k mi); '97 Bandit 1200 (2k mi); '13 FJR1300 (1k mi); IBA #28454 "45"
Print
Go Up Pages1
User actions