What did you do today?

[Autohag]

Will do, Jim. Ima work around Ian's schedule as I need his wisdom and he's house-fixing/house-hunting these days. Not to mention everyone is wanting to get out and ride. Tentatively planning to get started shortly after October 1.

[zooom]

workin on my birfday.....oh twell...

sucks to be responsible sometimes!

[Autohag]

workin on my birfday.....oh twell...

sucks to be responsible sometimes!

Happy Birthday! Take a long lunch...

[Meerkat]

He may be under my tutelage/supervision. You want a lesson too Jimbo?

Will do, Jim. Ima work around Ian's schedule as I need his wisdom and he's house-fixing/house-hunting these days. Not to mention everyone is wanting to get out and ride. Tentatively planning to get started shortly after October 1.

Yes and I can be quite flexible in terms of timing. I'm not due for some time, but want to decide if I can do it or need to farm it out.

[Slide Panda]

As I told Skunky, it's not hard - but does require some time if shims are needed and not on hand. A good bit of stuff has to come off to get at the valves - so it's not a job you want to do in the drive way. And if you've got to order shims - then there's the down time of waiting.

I did my valves over the winter - and at least a couple folks have seen my bike running since then So it's possible for mechanically inclined mortals to do

[tocino]

Let me know when you decide to do this...the skunk can be the guinea pig.

You'd better not be talkin' 'bout the fine S2R1000 I sold you (was it only last year? year before?)! I dub thee "The Skunk Maker"!

[Meerkat]

You'd better not be talkin' 'bout the fine S2R1000 I sold you (was it only last year? year before?)! I dub thee "The Skunk Maker"!

I would never defile my fine steed by calling it a skunk!!!

From Autohag's signature:
"2007 S2R1K Skunk
2009 696 Dark (RIP)"

PS It was just last year if you can imagine!

[Real Recognize Real]

Broke out the soldering gun and wired my powder coated clear lens headlight assembly. I can safely ride at night now

[Meerkat]

Rode to Seneca Rocks and back with Ben, Brian, Brett, Chris and Travis.

Had a cute little bear cross the road in front of us. Funny Brian started the day off by saying he was gonna ride with the bears.

[Jdan]

Got a nail in my rear tire. Already lost about 10 or so lbs or pressure.

make the beast with two backs New York

[DRKWNG]

Bought parts.

[Zulu]

Went on ride, after a long time... somehow a screw came loose off my handle bar grip.. Felt like i had throttle on both handle bars..

Time to go looking for right size screw 

[696DCRider]

Thread locker will prevent that from happening again.

[Real Recognize Real]

I just installed a headlight relay and I'm more than happy with the output. Hope to get the bike running soon.

[Autohag]

Bought parts.

Ditto.