Arrow p/n 5855109

[Bill in OKC]

I am interested in Arrow spare parts number 5855109 (arrow plate, dark
line) and part number 3608016 (Black Aluminium 3.0 mm Rivet).

Arrow replied to me and told me how much these cost, but when I asked where I can buy these, no replies.  Does anyone know where I can buy these things?  I am hoping they are the same size as my yellow/blue plates so I can swap them out.

[asherrick]

That's brilliant!  I've wanted to do that but figured it wasn't possible to get the parts.  Let me know what you find!

[jwoconnor]

I get my Arrow parts from Jason at Motovation.
http://www.motovationusa.com/

[Turf]

Any arrow dealer should do,

I'm partial to Eurosports.net bill will take care of you

Also some of the board sponsors should be able to help ya

[Bill in OKC]

I've tried several different Arrow retailers and the one that replied said they didn't carry these parts.  Unless there are better stocked Arrow retailers somewhere I guess this will have to wait.

[hcomp]

This is more than likely a close match for the rivets, depending on the length....

http://www.markertek.com/Racks-Cases/Rack-Screws-Hardware/Whirlwind/RIV-AD44BS.xhtml

As far as the plate, I can help without a picture.

[mookieo2]

I used 3/16  x 1/4" rivets with my arrows.

[Bill in OKC]

I am looking for p/n 22 and p/n 9B.  The dark line series has suffix -AON.  It shows Arrow part 5855109 in the -AON column.  I guess the different p/n is because the part is black/silver instead of blue/yellow.  I can get the 3mm rivets at a lot of places but I thought it would be nice to get them from Arrow - no need for the rivets if I can't get the plates.  I have 4 Arrow exhaust systems and would swap out all 4 if I could get the parts.

[hackers2r]

Did some research on this.  Here is what I found.  The kit (dark plate and dark rivets) is available for $14.00 plus shipping from Arrow's Canadian distributor, Eurocorsa.  The spacing between the rivets is approximately 4.75".  I'm considering this as I just disassembled the cans and am in the process of reassembling them. 

[booger]

I may be on crack but I think I've seen photos of Arrow cans without the badge, is this available as an option or is it something the owners somehow managed on their own?

[asherrick]

I may be on crack but I think I've seen photos of Arrow cans without the badge, is this available as an option or is it something the owners somehow managed on their own?

That would look nice.  I'm pretty sure that the owner must have modded them.

[hackers2r]

I'm guessing you can just put rivets without the badge.  Not sure how else that would happen.  Hmm...maybe I'll leave out my scratched up badge.

[Bill in OKC]

Did some research on this.  Here is what I found.  The kit (dark plate and dark rivets) is available for $14.00 plus shipping from Arrow's Canadian distributor, Eurocorsa.  The spacing between the rivets is approximately 4.75".  I'm considering this as I just disassembled the cans and am in the process of reassembling them. 

Thanks for the tip!  I've e-mailed them and we'll go from there.

[metallimonster]

Let me know how this goes.  I would love to get a set to replace the crappy yellow and blue ones on mine.

[Bill in OKC]

Eurocorsa is getting some in on Monday, so I've got my project on.  I *think* they'll fit - I'll report back as soon as I know for sure.