Wiring Question: Dash Schematic

Artful · November 10, 2010, 09:30:24 AM

My Trailtech Vapor came in today so I'm doing a bit of homework before I start hacking into the bike. The wires I need to know the colors of are:

Neutral Switch Light - Pin Position 10 - Y/G
Turn Signal Light - ??
Low Oil Pressure Light - Pin Position 11 - W/Y
Low Fuel Light - Pin Position 20 - B/W

I assume these have their own wires in the main bundle, if not let me know and I guess I'll just be running wires from the senders themselves...

I need to buy a service manual, but if anyone has this info handy I'd be eternally grateful.

Charlief · November 10, 2010, 11:36:28 AM

What year and type of bike?

Artful · November 10, 2010, 11:38:24 AM

Ha, sorry, had it in the thread title initially then edited it...

2007 Monster 695

Charlief · November 10, 2010, 11:43:59 AM

sorry I can't help. I've got the S2R wiring.

Bladecutter · November 11, 2010, 07:51:15 AM

If you have the owners manual, there is a full wiring diagram in there.
If you can find the link to the owners manuals on Ducati's website, you can get it that way.

BC.

Speeddog · November 11, 2010, 12:58:31 PM

One of the few online OM's that has the wiring diagram.....

Artful · November 11, 2010, 01:22:55 PM

Quote from: Bladecutter on November 11, 2010, 07:51:15 AM
If you have the owners manual, there is a full wiring diagram in there.
If you can find the link to the owners manuals on Ducati's website, you can get it that way.

BC.

That did it! Amazing that Ducati includes that...

I updated my original post to answer my own questions.

Artful · November 11, 2010, 01:47:37 PM

OK, so one bit that is still not 100% clear.

The turn signal switch goes to two posts on the dash. Pin Position 1 - B/G and Pin Position 9 - G/Bk.

I'll take the multimeter to it tonight or tomorrow, but does anyone know conclusively which wire I should be going after? For a fuel injected bike, this is a pretty basic diagram, I'm impressed.

Speeddog · November 11, 2010, 02:16:18 PM

The blinker relay is *inside* the OEM cluster, so you'll have to come up with a separate blinker relay.

Artful · November 11, 2010, 02:20:12 PM

Quote from: Speeddog on November 11, 2010, 02:16:18 PM
The blinker relay is *inside* the OEM cluster, so you'll have to come up with a separate blinker relay.

Bah.

Anyone with any ideas on how to wire that up? Reading schematics isn't too difficult, wiring up relays is where I start to get a little out of my league.

News:

Wiring Question: Dash Schematic