fastfromthepast.com rearsets?

[Privateer]

has anyone assembled rearsets from fastfromthepast.com?

I don't think I'm stupid, but I can't figure out what mounting plate I need for an 04 620.

[Cloner]

I think all he sells are Tarozzi rearsets, no?  I've never seen a set on a Monster.  I've used them on several vintage restorations, and currently have a set on my Aermacchi.  I typically fabricate my own mounting plates, but if there are some commercially available for your bike that'd be much easier!

You might give Jim a call.  He's good folks and easy to deal with.  He's located in Atlanta, GA and is pretty knowledgable in my experience.

[671M900]

I think all he sells are Tarozzi rearsets, no?  I've never seen a set on a Monster.  I've used them on several vintage restorations, and currently have a set on my Aermacchi.  I typically fabricate my own mounting plates, but if there are some commercially available for your bike that'd be much easier!

You might give Jim a call.  He's good folks and easy to deal with.  He's located in Atlanta, GA and is pretty knowledgable in my experience.

Tarozzi's are usually for vintage/old bikes that need something different or rearset parts are unavailable, like my Suzuki GS650 from 1981, I don't think they make a set for something as modern as a monster. However, you could always order the parts individually and fab up a mounting plate with a local machinist.

[Cloner]

Tarozzi's are usually for vintage/old bikes that need something different or rearset parts are unavailable, like my Suzuki GS650 from 1981, I don't think they make a set for something as modern as a monster. However, you could always order the parts individually and fab up a mounting plate with a local machinist.

Small world, huh?  I owned a GS650GL back during the stone age.  First bike I ever spent my own money to buy!   [moto]

I agree with your assessment of Tarozzi parts.  Typically used for vintage projects.  They would, however, look stunning on a Monster.   

[671M900]

Small world, huh?  I owned a GS650GL back during the stone age.  First bike I ever spent my own money to buy!   [moto]

I agree with your assessment of Tarozzi parts.  Typically used for vintage projects.  They would, however, look stunning on a Monster.   

I think you would be happy to know that there is a Suzuki GS community that is just as helpful and tight knit as the DMF. They're a whole lot more active, because 9 times out of 10, a GS has been sitting in a garage for at least a decade. I know mine was before I restored it...

[Privateer]

They would, however, look stunning on a Monster.   

yeah, I'd love it if I could bolt these onto something and slap them on my monster:

[BellissiMoto]

These are what you need :




I'm actually putting a set on one of our custom builds at the moment, and they are very nice.

Get them here - http://bellissimoto.com/DucaBikeRearsets.html

And don't forget to say that your a forum member in the payment notes so you will receive a 10% discount via partial refund after ordering.

[671M900]

HOOOOLY make the beast with two backs!



classic monster rearsets under $300??!?! I didn't even know ducabike made any for our bikes!

One question, is there any sort of passenger peg bracket like the rizomas or cc's available?

[bailes23]

classic monster rearsets under $300??!?! I didn't even know ducabike made any for our bikes!
One question, is there any sort of passenger peg bracket like the rizomas or cc's available?

Same here - I've been looking for rearsets similar to these! Obviously I wasn't looking hard enough
I would love to know if you can get a passenger attachment for these?? The wife might get a bit cranky if I take away here pegs 

[BellissiMoto]

Same here - I've been looking for rearsets similar to these! Obviously I wasn't looking hard enough
I would love to know if you can get a passenger attachment for these?? The wife might get a bit cranky if I take away here pegs 

Unfortunately there is no passenger peg attachment available for these - at least not yet.

They really are nice in person, I can't wait til I can actually ride the bike with them on.

[moto]

[Privateer]

Unfortunately there is no passenger peg attachment available for these - at least not yet.

They really are nice in person, I can't wait til I can actually ride the bike with them on.

[moto]

wow those are really nice.  I've looked at your ducabike selection before and never noticed those.

I know the FFP ones had the same problem, but I hadn't gotten there yet. Any suggestions on hanging low pipes?

[ccm900]

These are what you need :
http://bellissimoto.com/DucaBikeRearsets.html

I'm stoked on these. How about for high mounts?

[Privateer]

Any suggestions on hanging low pipes?

Anyone?

i mean I suppose I could get an exbox or boomtubes or something, but that adds up to some expensive rearsets.

[BellissiMoto]

If I owned a Monster these would fit on I would let you know how they work with each exhaust first hand, but unfortunately I don't at this time.

That said, I can't see why they won't work with either high or low mounts, but if somebody purchases them and realizes they won't work - just send them back for a full refund (just don't damage them).

I'll post up some pictures of them mounted on my ST4 soon for you guys to drool over though.

[Punx Clever]

I wonder how hard it would be to add some mounting tabs to a S2R frame for those...