Electraeon fast throttle cam for 620

Started by sburrows87, February 21, 2011, 01:11:45 PM

Previous topic - Next topic

sburrows87

Hi guys/ gals,

Just to double check before I buy (I'm from the UK and it would be hard to exchange lol), I need the type 2 cam from >here<  for my 2004 620 right?

Cheers!  ;D

Veloce-Fino

I purchased the type 2 for my 09 696.

I think you may be type 1.

I would just email them and ask. They responded to me same day.

Is this thing on?

Kopfjager

Just look at the 2 photos and match it up to the cut out at the top of the stock cam.
Woohoohoohoo! Two personal records! For breath holding and number of sharks shot in the face.

sburrows87

Thanks guys, I am not near my monster at the mo but I have dropped them an email. I am 70% sure it is type 2 but just need to confirm before I pull the trigger [moto]

sburrows87

Ok guys, for anyone interested it was type 2

atomic410

anyone have one of these?  i was wondering if it makes a noticable difference in excelleration? the 620 is such a turd until its at 50% throttle for the track it would be nice to be able to pick it up quicker esp with my new lw flywheel for maxum excelleration.   [bacon]
Team Atomic Racing  Check us out @  www.teamatomicracing.com
Thanks to my 2011 sponsors;
Motorex, Vortex Racing, Sidi Racing, Studio 299, Dunlop, Motoprimo, Caztek, On Track 4 Him, Fix Studio
2009 Framstad Cup winner
2009, 10, & 11 CRA 5 hour endurance race winner
CRA Expert #2
ZARS track school instructor

DucatiTorrey

yeah, any difference on the 696? what does it feel like? just less pull required on the throttle?
  - real place

scduc

I have read here that some people are using the G2 throttle tamer along with the fast cam. I think I might try this. With the tamer, you get smooth operation, but slightly less throttle at initial rotation. So in theory, by adding the fast cam, you would get the roataion back and get super smooth op. However, G2 is currently working on interchangable throttle cams for street applications. This would eliminate the need for the fast cam.
08' S2R 1K   That was close  damn near lost a $400 hand cart.

stopintime

I got this because the wrist and/or elbow movement, in my opinion, is much too long.
Either my wrist was twisted at the end of throttle play or I had to loosen my grip and raise my elbow before gunning it.

It gave me much better control. Some say it makes the bike more twitchy (smaller inputs required), but that has not been a problem for me.

252,000 km/seventeen years - loving it

Raux

I'm using the Electaeon for the 696 with clipons.

much better on the wrist. smooth throttle is a light twist. so much better all around than stock with bars.

Veloce-Fino

Quote from: Raux on February 24, 2011, 09:59:39 AM
I'm using the Electaeon for the 696 with clipons.

much better on the wrist. smooth throttle is a light twist. so much better all around than stock with bars.

I agree, totally worth it. However I find myself speeding a lot more.  [evil]
Is this thing on?

Raux

Quote from: Veloce-Fino on February 24, 2011, 10:54:05 AM
I agree, totally worth it. However I find myself speeding a lot more.  [evil]

what's speeding?

Veloce-Fino

Is this thing on?

junior varsity

those numbers on the highway are merely suggestions.

pcv57

Does the fast cam have to be used with the G2 throttle tamer or can it be used with the stock throttle? From the pictures I can't see how its installed.