What is This Wire?

Started by Bogie, February 27, 2011, 04:43:29 AM

Previous topic - Next topic

Bogie

I was installing the new viz tech brake light today, well my friend was installing it, but I was looking busy.  Anyway we were poking around and found this wire



Does anyone recognize it?  Can anyone tell me where it goes? Obviously it unplugged from somewhere but we couldn't find it.  To give perspective on the pic, the wire is on the dry clutch side.  It's not the foot brake light, we already checked that.  And the bike still runs fine.  I'm just afraid that it could have something to do with the Bat signal and well all of Gotham City could be in danger if that doesn't work.  Thank you in advance for making fun of me.

Raux

your picture is too small to see

Bogie

Sorry I'm new at this.  How's this one?



Hope this works

Bogie

Obviously this was not found like this. I was just inside the frame but we pulled it out (gently) to get a better pic of it.  Thanks.

battlecry

Does your neutral light work? 

ducpainter

"Once you accept that a child on the autistic spectrum experiences the world in
 a completely different way than you, you will be open to understand how that
 perspective
    is even more amazing than yours."
    To realize the value of nine  months:
    Ask a mother who gave birth to a stillborn.
"Don't piss off old people The older we get, the less 'Life in Prison' is a deterrent."



battlecry

 ;D I feel that fast.   Real strong coffee this morning.   

There is a hole in the rear of the right case with a center pin terminal inside.  It may be easier to insert the connector with needlenose pliers.  You may want to put some dielectric grease on the terminal to protect it from corrosion.

Bogie

No my neutral light doesn't work.  Where exactly does it plug into?  You guys are the best and can you pick up that grease stuff at NAPA?   

ducpainter

Quote from: Bogie on February 27, 2011, 06:14:32 AM
No my neutral light doesn't work.  Where exactly does it plug into?  You guys are the best and can you pick up that grease stuff at NAPA?   
Yes you can get the dielectric grease at NAPA.

If you look at the back of the motor just slightly to the right of center, and just below the swing arm pivot, you should see the switch recessed in the case. About 3 or so inches to the left of that you'll see a large hex. That is the detent for the shift drum. In case you can't find the switch right away.

The parts diagrams available here... http://ducati.com/services/maintenance/index.do might help in finding things. Most Duc motors have the switch in the same location so don't worry about not finding your exact bike listed.
"Once you accept that a child on the autistic spectrum experiences the world in
 a completely different way than you, you will be open to understand how that
 perspective
    is even more amazing than yours."
    To realize the value of nine  months:
    Ask a mother who gave birth to a stillborn.
"Don't piss off old people The older we get, the less 'Life in Prison' is a deterrent."