Would a Street Fighter Belly pan fit 2004 S4R?

[wiredbeans]

Hi All

I was just offered a good deal on a newly take off belly pan from a Street Fighter. I know direct bolt on would be a long shot, but if it can be adopted to the monster with minimal modification I will get it and try.

Has anyone done/try this?

[Latinbalar]

With some Braketry work anything is possible. But will it look good? Try taking your bike there and dry fitting it by hand ans see what it looks like.

[NorDog]

He said, "...dry fitting by hand..."

 

[booger]

He said, "...dry fitting by hand..."

 

[Latinbalar]

Sorry engrish not so good. 


I meant to say hold it up to the bike and see what it looks like.

[Jarvicious]

Depending on the size of the hammer, anything can be made to fit anything else

[wiredbeans]

I droped by the dealer today and took a look, it's actually 2 pieces of side fairings... no pan part, bottum is not connected like a belly pan. its attached to the bike with bracket at the engine side and on the oil cooler. The oil cooler is the "triangle" type that you see in 07-08 S4R/S4RS. I have an 04 with the tiny rectangle oil cooler.

I think it will fit nice with the oil cooler, I need to get one now... anyone has a decent one willing to spare? for sell? the newer oil cooler looks to be the same width and mounting point is the same.