Main Menu

98 monster wiring burning up

Started by lawmaster891, August 30, 2011, 05:11:39 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

lawmaster891

August 30, 2011, 05:11:39 PM
my 98 monster 900 has burn up the wiring at the connection from the stator. i had replaced the wire once back in February because it had burnt up and it has now done it again. the voltage regulator is not bad i am getting good readings with my dmm while reving the engine with readings around 13.5 when revved. has anyone else had this problem or can help.

ducpainter

#1
August 30, 2011, 05:30:31 PM
lots of people have had issues with that connector.

Many just solder the connections.
"Once you accept that a child on the autistic spectrum experiences the world in
 a completely different way than you, you will be open to understand how that
 perspective
    is even more amazing than yours."
    To realize the value of nine  months:
    Ask a mother who gave birth to a stillborn.
"Don't piss off old people The older we get, the less 'Life in Prison' is a deterrent."


lawmaster891

#2
August 30, 2011, 08:00:44 PM
thanks i did some searching and decided to solder the connections. Except i marked the wires when i cut the connectors and in the process of soldering my marks have disappeared. so now i need someone who can tell me how i find out which three stator wires connect with the regulator wires for all three are yellow.

Speeddog

#3
August 30, 2011, 09:29:46 PM
You can connect the 3 yellow wires together in any combination, it doesn't matter.
- - - - - Valley Desmo Service - - - - -
Reseda, CA
(951) 640-8908

~~~ "We've rearranged the deck chairs, refilled the champagne glasses, and the band sounds great. This is fine." - Alberto Puig ~~~

lawmaster891

#4
August 31, 2011, 03:56:44 AM
alright thanks for the help

H-2 CHARLIE

#5
August 31, 2011, 09:20:28 AM
use that silicone grease for any and all plugs . [clap]
Print
Go Up Pages1
User actions