anyone know where i can get AN-6 hose ends for oil lines locally?

seanster · February 10, 2012, 05:54:46 PM

hiero · February 13, 2012, 08:04:17 AM

any auto shop can get those, radiator shops, etc. You can go to the auto parts stores (they might need to order for you), you can go to industrial suppliers (of which Houston has tons of).

seanster · February 13, 2012, 02:46:00 PM

Quote from: hiero on February 13, 2012, 08:04:17 AM
any auto shop can get those, radiator shops, etc. You can go to the auto parts stores (they might need to order for you), you can go to industrial suppliers (of which Houston has tons of).

Thanks!

I guess I can order them online...

hcomp · May 30, 2012, 11:09:21 PM

I have a whole bunch (straight, 45,90,120,135,180, and 90 compact) ,but you probably already got em'. I am an aeroquip and Mocal distributor should you still need them now, or in the future.

hiero · May 31, 2012, 05:15:08 AM

Quote from: ryanracer on May 30, 2012, 11:09:21 PM
I have a whole bunch (straight, 45,90,120,135,180, and 90 compact) ,but you probably already got em'. I am an aeroquip and Mocal distributor should you still need them now, or in the future.

good to know though!

hcomp · May 31, 2012, 07:45:44 PM

I also have stock of 3 different types of line (stainless braided, nylon braided, and kevlar braided), AND I can make them for you without marring or scratching the anodizing on the fitting (got all the AN aluminum wrenches..), I would do this for the local folks here at least.

seanster · May 31, 2012, 08:33:14 PM

dang...i bought the line already. if I haven't, I would come to you. you are in SA right?

Maybe I can stop by and you get it done for me...I'll be in Austin soon, maybe I can drop by during the weekend.

hcomp · May 31, 2012, 11:35:55 PM

No problem, I am not butthurt in the least!

Yes, I am on the west side of S.A. Drop me a pm if you need them cut and assembled.

Pedro-bot · June 15, 2012, 04:48:41 PM

Quote from: ryanracer on May 31, 2012, 07:45:44 PM
I also have stock of 3 different types of line (stainless braided, nylon braided, and kevlar braided), AND I can make them for you without marring or scratching the anodizing on the fitting (got all the AN aluminum wrenches..), I would do this for the local folks here at least.

I could use a set for my S4. I'm going to add an oil cooler to it.

I made my own set for the M750 a couple of years ago but I did end up marring the nice anodized bits. Not too badly though, but still.

News:

anyone know where i can get AN-6 hose ends for oil lines locally?