CRG mirrors: Can't find parts...

[Jimmy6tring]

I've lost this screw on my CRG LS mirror and can't seem to find one at any of the hardware stores around here.  emailed CRG but haven't gotten a response and I wouldn't be siked to pay $10 shipping on a .37c screw anyway.

Any ideas on where I could pick one up that would be a simple fix?

IMG_0375 by jimmy6string, on Flickr

The other side showing the screw that is missing from the left:

IMG_0377 by jimmy6string, on Flickr

[Duck-Stew]

Remove the other screw to dimension it, then contact any of the below:

McMaster Carr

Metric Specialties (Santa Clarita, CA)

Got a **GOOD** local (non-major chain) hardware store to go to?

[Ak1nza]

I'm missing the exact same screw on my CRGs!

Let me know if you find a replacement.  I was going to see if CRG had them but doesn't look like that path was beneficial to you.

[Jimmy6tring]

I checked with my local ACE Hardware, gonna keep my eye out for any other good smaller hw stores. Barring any luck there it seems the easiest solution is to get the CRG replacement glass kit which includes the two washers I'm also missing for around $20.... Meh

[DesmoTull]

To all you that have lost screws, make sure you use some loctite next time!   

If you have a Fastenal dealer near you, they might sell you a few.

[dolphaxel]

I used to work at a hobby shop and We stocked hardware that small. Also our local fasten all can get down to 2mm in stainless next day

[Jimmy6tring]

That's good to know... I hadn't checked fasten all.  But I broke one of the glasses yesterday so looks like I'll be going the replacement glass option. 

[gjsnyc]

https://store.bevelheaven.com/crg-replacement-parts/

[JEFF_H]

here's another option for stainless bolts
http://desmoparts.com/products/screws-individual-stainless-screws-nuts-washers-wellnuts

[Jimmy6tring]

https://store.bevelheaven.com/crg-replacement-parts/

Thanks, Jeff and gj, I need to get the replacement mirror anyhow but I saved that link.