Tail chop. To bracket or not to bracket

[memper]

Looking at ducatisuite, a bracket was not used. Is all this bracket stuff basically a means to give your signals and lic plate an easy home?

[showerfan]

a way to drain your wallet. drained mine

[seanster]

Looking at ducatisuite, a bracket was not used. Is all this bracket stuff basically a means to give your signals and lic plate an easy home?

I believe there are 2 options for mounting ur license plate after the chop

1 is directly under ur tail light
2 is under need the seat (by the mud guard) hence stealth looking.

Check ur frame to see if you have the mounting tabs for the tail light...if yes i dont think u need the bracket because after the chop, u can just mount the light back in the same position.

As for my bike which is the 2000 M750, the tail light mounted onto the beer tray, so when i loose the beer tray, then i have to make my own bracket to hold the light.

If u need bracket, then take a look at ducatimonstertailchop.com and also check out those integrated tail light too and the stealth bracket

[corey]

not completely necessary. if you're resourceful, you can make one on your own for a lot cheaper.
try to incorporate a spot for your license plate LIGHT to go, to keep you from getting hassled during state inspection and/or any unfortunate traffic stops...

[Nottsbiker]

I believe there are 2 options for mounting ur license plate after the chop

1 is directly under ur tail light
2 is under need the seat (by the mud guard) hence stealth looking.

Check ur frame to see if you have the mounting tabs for the tail light...if yes i dont think u need the bracket because after the chop, u can just mount the light back in the same position.

As for my bike which is the 2000 M750, the tail light mounted onto the beer tray, so when i loose the beer tray, then i have to make my own bracket to hold the light.

If u need bracket, then take a look at ducatimonstertailchop.com and also check out those integrated tail light too and the stealth bracket

3 off the side of your swingarm like a chopper
4 'on' the back tyre like a Diavel

[seanster]

3 off the side of your swingarm like a chopper
4 'on' the back tyre like a Diavel

haha yes...that's 3 and 4.  Personally 3 is just too big on the side and 4 doesn't really look clean enough for my taste.  Thanks for pointing that out though. 

[memper]

Ok. I'll have a look this weekend. I have a 99 750, with luck i have the frame tabs. If not im sure it could be solved with a bit of angled alum strap.
I plan to run my rear stalk signals through the sides of the bit of frame left after the chop.
Dont like the look of the turns IN the cutoffs.
My current plate holder is just pop riveted to the underside of the beer tray. Relocation will be a snap

[showerfan]

on the back wheel like a diavel looks awesome. here's a pic on an 1100 evo. but i once asked the dealer how to get a bracket like that and they looked at me like i was crazy but of course they always look at me like that in SOHO.

[seanster]

on the back wheel like a diavel looks awesome. here's a pic on an 1100 evo. but i once asked the dealer how to get a bracket like that and they looked at me like i was crazy but of course they always look at me like that in SOHO.

dude...that color scheme of the italian flag by the swipe of the tank is exactly what I was imaging for my bike when I get it painted....thanks for sharing that pic.

[memper]

Sick idea but looks best on SSS.
I did the chop and brackets were there so no kit necessary. I took the signal plate/tag plate and just mounted it to the underside of the plastic wheel well and secured it more with zip ties. All good and looks much better.

[JEFF_H]

to showerfan- pretty sure that is a Rizoma part

[take risks]

go get a scrap of aluminum and make your own.
super easy, and better than spending $40 bucks or whatever on a piece of bent once metal.

[118811]

dude...that color scheme of the italian flag by the swipe of the tank is exactly what I was imaging for my bike when I get it painted....thanks for sharing that pic.

+++++11111 on paint job!!

Love that exhaust tooo....yeah Sean

[seanster]

My exhaust is to the left buddy...something different...

Cant wait to get it .....

[118811]

My exhaust is to the left buddy...something different...

Cant wait to get it .....

Left side...blasphemy ....

Do you have a can for it yet?

This would look awesome!!!

http://www.ebay.com/itm/Ducati-Monster-Vance-HInes-exhaust-/110922009976?pt=Motorcycles_Parts_Accessories&hash=item19d3778d78&vxp=mtr