Well, I finally got around to finishing my mod on my belt covers.
I used:
1 dremel.
2 Coping Saw with fine toothed blade.
3 Files, ranging from flat bastard to round bastard.
4 Drill.
5 Beer.
I roughed out with a pencil of what i wanted, just sort of free handed it, but for the straight bits, used a rule. I did the top cover first ages ago, before my accident and wanted to get the bottom cover done asap.
So, here goes:
I had already done the first few cuts before I realised that this may inspire some people, so I whipped the camera out.
Note how straight my cutting is
, that's what the Dremel and files are for.
