UPDATE: read the first bloghttp://kuixihe.com/S2R1100also available
http://www.ducatimonsterforum.org/index.php?topic=59525.0You've read the other post and know my bike went kapoots.
So where am I now with the bike?
I bought an 1100 EVO motor. Mechanically, its a drop into the frame and the S2R swingarm mounts up nicely.
Electronically, I still havent found a solution to the oil temp (the sensor is in front of the rear cylinder). I may swap sensors out.
I have to figure out how I am suppose to mount the oil cooler since the EVO mounts to the frame. I'll probably swap valve covers and use the original temp sensor.
the TBs SHOULD fit. They look like they will mount up. I havent checked for certain yet.
I need to swap coils, I was going to go with Ca-cyclework coils, but I ended up finding an S2R800 coil for $25 on ebay.
The local guru shop (European Cycle Services) said they can flash the ECU and drop any map I want onto it (custom of course). Though I think I will still need a PCV since I need a dedicated spark map. They arent sure until they see what the yare working with. If i run a PCV, ill be able to run a dual map (fuel conserving commuting mode and weekend mode).
Can Anyone comment on the spark map? Someone said that I need to swap the timing gears, but if you can just edit the spark map wouldnt that be easier?
Other then that, here are some teaser pics.
Mock Fit on saturday.
![](http://kuixihe.com/gallery3/var/resizes/My%20Motorcycle/Bent-Valve/2012-08-19-039.jpg?m=1345356605)
Clear on Bare
![](http://kuixihe.com/gallery3/var/resizes/My%20Motorcycle/Bent-Valve/P1030900.JPG?m=1345679669)
![](http://kuixihe.com/gallery3/var/resizes/My%20Motorcycle/Bent-Valve/P1030918.JPG?m=1345679701)
Next up is the Tank. I dont like the way raw tank and raw frame looks. I might do something different with the tank. There is a dent on it and I dont know how I can pull it out without disturbing the finish. I dont mind the repair look. My frame has tons of marks on it from going down. I think it adds character and history to my bike.
![](http://kuixihe.com/gallery3/var/resizes/My%20Motorcycle/Bent-Valve/P1030872.JPG?m=1345680043)