where to get intake runner "valve/nipple thingy"

[memper]

I lost one of them when I removed the emissions stuff and I need to sync my carbs.

[Speeddog]

I lost one of them when I removed the emissions stuff and I need to sync my carbs.

What thread size do you need?

[memper]

Def an M5. Threads are 1mm or .5mm
'99 750

[Speeddog]

I'll check to see if I've got any extras.

[memper]

 

[garryc]

Pretty sure these ones fit
https://store.bevelheaven.com/workshop-tools/intake-manifold-adapter-w/cap-5mm-brass/

[Speeddog]

Or, direct from the source:
http://www.motionpro.com/motorcycle/partno/08-0218/


or even better, with a 500mm hose and capped end for easy access:
http://www.motionpro.com/motorcycle/partno/08-0216/


I've got some extras if you want to go that route.

[garryc]

We aussie heathens can't buy direct from motion pro so need alternate sources for their stuff

[jerryz]

buy them from carbtune uk they have 2 sizes
and brass or plastic but brass is best for permanent fitting

[Speeddog]

We aussie heathens can't buy direct from motion pro so need alternate sources for their stuff

Fair enough, didn't know you were an Aussie Heathen.

[memper]

Thanks for the "tips"

[Howley]

I think my bike has two different size threads on the intake manifolds. Could that be true? I wanted to sync my carbs ages ago but I only had one fitting that fit.

[memper]

Yes, I believe. The fittings on the inside of the runners are bigger than the ones on the outside. I'm just gonna order a couple new ones.