Reuse/Replace green fuel filler cap o-ring (02 M620)

[nsherman2006]

Hello,

I recently repainted my M620 tank and need advice whether the green o-ring on the fuel filler clange should be reused or replaced?

If so, is there an economical way to obtain 2 of these o-rings? I do not have a nearby dealer and prefer to order online. I thought I had seen this in a thread, but am unable to find it.

thanks!

-Neal

[Speeddog]

If it's not damaged, and it fits snugly in the groove, you can re-use it.

Replacements can be had here:
http://ca-cycleworks.com/products/maintenance/gaskets-o-rings/or-40111a

Or at your local dealer.

[lazylightnin717]

Check out my recent thread for reference.

http://www.ducatimonsterforum.org/index.php?topic=64382.0

I bought a pack of 5 viton o-rings from McMaster for about 8 bucks shipped to my door. The OEM ring was somewhere around $14 for one...and in my case, it wasn't the right size.

I'd sell you the leftovers I have but depending on where you are, McMaster could have it to your door quicker.

Of course, I would never want to dissuade you from using a site sponsor for OEM parts either 

[brad black]

i never replace them unless they're damaged.

[ducpainter]

I have a cap holder I use for coating tanks. It's been in and out of tanks probably 1000 times.

I had to replace the o-ring once when I used it to remove a failed Kreem job with MEK as the solvent which swelled the o-ring.

Save your money.