Ecu question

[cbcanada]

My new ecu after the reflash has 2 stickers on it.. Which is the correct one?

Also there is two unconnected harness behind the ecu. Anyone know what these are for?

http://flic.kr/p/oXMkxw

[Duck-Stew]

There isn't a sticker which normally goes onto an ECU after re-flashing (at least not that I've seen).  The 2 stickers in your photo are the original from when the ECU was new from Ducati.  The Ducati Performance ECU's have a different sticker than the 'SB18DZ12' one you have.

I know there is a single, two-wire connector near the ecu which is used for the service scan tool to communicate with the ECU.  I'm not sure of the 2nd one you're mentioning.

[cbcanada]

There isn't a sticker which normally goes onto an ECU after re-flashing (at least not that I've seen).  The 2 stickers in your photo are the original from when the ECU was new from Ducati.  The Ducati Performance ECU's have a different sticker than the 'SB18DZ12' one you have.

I know there is a single, two-wire connector near the ecu which is used for the service scan tool to communicate with the ECU.  I'm not sure of the 2nd one you're mentioning.

I will take a picture tonight and post

[stopintime]

Battery charger is the second one (at least if S2R)

[cbcanada]

Battery charger is the second one (at least if S2R)

Yes s2r

[DarkMonster620]

Sometimes Ducati re-purposed ECUs, mine is also like that, has a sticke with tiped numbers above the metallic one . . . mine was from a 999 ended up being a M620

[brad black]

the top sticker is the ducati software #.  the other is the ecu sticker from marelli.  some flashers don't put a label on saying what it is.  i generally do, but not always, esp if i'm just disabling the immo.  is there another sticker on the other side.