mivv high mount install

[darksouls]

Ok so i got ducabike rearsets on the 620 monster, thinking i needed high mounts for the rearsets. I got the carbon oval mivvs high and the instructions show to mount to the stock rearsets.  any ideas where to mount them on the frame? I thought of making some brackets that clamp to the pass. grab bars, but i figured i'd check here first. Thanks guys!

[stopintime]

If the mounting straps reach high enough, something like this?
http://www.desmoworld.com/shop/ducati-monster/s4-m620i-e-m1000i-e/auspuff/auspuff/spark-halteschellen.html
Probaly cheaper generic hardware to get, but this just as an idea..

[darksouls]

i ended up just getting some aluminum flat stock and thin rubber. $4 bucks. saved quite a bit of weight just not using the specific hardware and brackets that came with the exhaust. I'd post pics but for some reason i dont know how on here.

[Howie]

Here ya go:

http://www.ducatimonsterforum.org/index.php?topic=109.0

[Slide Panda]

Please post.

I was pondering their High GP cans, but have aftermarket rear sets with only rider accomodations