Ducabike oil aquarium

[oldndumb]

Look for MetTec on ebay.

M5-.8X18Mm

I've used Ti from several vendors in the past and found MetTec to be high quality. Other than ProTi, they are the only vendor who provides detailed information about their product. I did not use ProTi because their on line ordering process is clunky IMO.

[Willthedub]

Clutch cover fitted

[The ModFather]

For those who have installed the Ducabike Clear Wet Clutch Cover have you noticed any issues with the oil level reading? On the Diavel forum there were some folks saying that where the sight glass is position is different and it was reading low when it actually wasnt. The Ducabike Clear Clutch cover for the Diavel is of course different than the one for the Monster so I wasnt sure if the issue was also encountered on Monsters.

[oldndumb]

I think I measured the sight glasses before I installed mine but I could be mistaken, so I'll measure them tomorrow to be safe.

Update: Both sight glasses measured the same using the dimension from an adjacent bolt hole to the Min mark.

[Lions Grip]

Just got this installed on my bike. Almost done the mods. Just need clip ons, vinyl wrap forks, and finish getting the black panels painted.

IMG_0272 by Lion's Grip, on Flickr

[The ModFather]

I took a pic of the oil level with the old clutch cover on then put the new clear ducabike clutch cover on with the bike on the kickstand (no oil was lost) then took a pic again and the oil level was the same for both old and new covers so the question I raised about incorrect oil level readings with the ducabike clutch cover is a non-issue.