S4R Fuel Line Touching Exhaust

Started by Derekv, September 09, 2015, 01:01:15 PM

Previous topic - Next topic

Derekv

Had a close call.  The fuel line from the tank to the fuel pressure regulator was in contact with the exhaust.  It melted the outer layer, the cords, and was working on the inner layer when I caught it.  It was seeping fuel and if I bent it, a steady stream of fuel shot out onto the exhaust.  This could very easily resulted in a fire that burned my S4R to the ground.

All fixed now.

Derek V
2005 S4R

Speeddog

Any pics of how that line was routed?

Definitely didn't come that way from the factory.
- - - - - Valley Desmo Service - - - - -
Reseda, CA

(951) 640-8908


~~~ "We've rearranged the deck chairs, refilled the champagne glasses, and the band sounds great. This is fine." - Alberto Puig ~~~

Derekv

I figure the PO replaced the hoses and it was routed down next to the exhaust, just under the aft part of the tank.  No pics of the routing, I did take one of the melted hose though.  New hose is routed so that it won't happen again.

Derek V
2005 S4R