dang, santa found MY house....

[lazarus7]

i guess santa liked me....
geez, i'm gonna run out of things to do soon....!!!!!
only things left are termi's and bst's.....













geez imagine if id been BAD this year......

[Charlief]

Those rear sets are superdupersnazzy!

[Chchadder]

Did Santa leave any Rizoma gear for the rest of us??? 

[He Man]

WOW those rear sets are make the beast with two backsing bling blang!

[DucHead]

I like the helmet!! 

[geoffduc]

Well Lazarus who's been a good boy then   it certainly looks like the   rizoma catalogue has been hit hard and don't those fluid pot backets look cool   i guess we will have to wait for the photo's.
BTW went to a classic bike meeting today on the 1100s you would have been in your element  [moto]

[NekkedChic]

WOW Laz!!!!!   
BTW, where are those BARS GOING???   You got another Duc?  You had RED bars on Monster I thought??   

Gotta post up my mods i FINALLY GOT DONE on Beastie Boy!!!!!!   
Tim got me Rizoma bars in RED, rizoma grips and bar ends, Oberon red pegs, frame and axle sliders and FEK from CW!  (trying to find thread on the CW FEK someone posted??? )   

WOOT!  Now, get BUSY!! and post more pix too! 

You RIDING YET??  Ozello Sunday, btw, can you go too???!!!!

[lazarus7]

bars are going on the s4rs....
black rizoma bars, black pazzo levers, black rizoma lux grips, black rizoma reservoirs and risers....
red bars and grips are on her 696, duuh....

[lazarus7]

oh, hows this for getting busy....?
new rizoma rearsets installed,
and i cleaned up the rest of the wires while i was at it,
and re-routed the rear brakeline/ wire/ clamps on the shift tech hugger....
bars/ reservoir risers/grips /pressure plate will be done in a week,
dont have a hydraulic press to press out the pressure plate bearing and in the new rizoma one,
nor a drill press to drill the new bars for the controls, my drill press isnt currently convenient...
so that'll all be done next weekend...
guess well just have to ride them for a week...!!!

[lazarus7]

oh, and no can do on the ride,
doin' the family thing for a while....
but i am back up and riding now, neurologist cleared me and ive
got about 4 rides under my belt since,
so im ready....!!!

[geoffduc]

It's looking good  but i'm not seeing a rizoma sprocket cover (part no zdm014b) on the bike yet 
you know it's got to be done 

[geoffduc]

BTW Lazarus i found it better to cut the small nubs off the clamps that hold the levers and throttle on the handle bars and use some thin double sided tape between the bars and clamps as it gives you room to adjust the controls to suit. I've drilled on one bike and tapped on the other and had no problems with the tapped one  .
Just a thought on the rizoma grips i found that there was quite alot of free play when i fitted mine on the s4rs so let me know if you have the same problem.
Glad you are back riding again  [moto]

[DucHead]

You do not need a press to remove the bearing from the pressure plate.  A socket and hammer works fine.

[Gus Duc]

Beautiful

Maybe next Christmas Santa will bring you a new ECU & some pipes so you can get rid of those blue headers & that tumor underneath

Can your Rizoma go much higher or further back than you have them set   Also,did they give you more room on your right side peg   I know with the stock pegs & exhaust any sporty riding requires strong calfs as you can only get your right toes on the peg

[lazarus7]

thanks pomp, i think ill give that a try tomorrow...

gus, ive got them all the way up for cornering clearance, theyll go one bolt hole farther back, but ive got long legs, so.....

im thinking carbon sprocket cover someday....
gotta have SOMETHING to do later....