Cleaned up underseat wiring...

[DucHead]

The brake and turn signal wiring under my seat was a mess:


Plus with the new tail light, I didn't like the bracket situation back there. 

I bought one 3-pole- and two 2-pole weather-proof connectors from McMaster Carr, and got to work. 
I cut and drilled an aluminum plate to hold the resistors for the LED turn signals and wiring, ran the wiring and cut lengths as I went along to ensure proper lengths.  I also fabbed and painted a new one-piece turn signal/tail light bracket.

Here's how it turned out:


Much neater under there!!!

[He Man]

i think you were the one who posted the thread about modding going to far....

this is modding going to far. nice job though!

[stopintime]

Not because I say so, but because you want to (I know you do) here's what you do:

wash the plastic, reroute the rear light wires under the red seat latch bracket, straighten the right connector and paint the new resistor bracket.

I just love tidy

[Spidey]

modding going to far.

does not compute
does not compute
does not compute

[geoffduc]

Nice one Dave, you are starting to take my crown away from me

I'm glad you posted pics as Spidey might have thought you where having us on 

[needtorque]

To add to your list of mods: you need to wrap those exposed wires in plastic tubing or electrical tape. 

[DucHead]

wash the plastic, reroute the rear light wires under the red seat latch bracket, straighten the right connector and paint the new resistor bracket...

Wash?  Huh? 

I'm worried the seat latch pin will hit the wires if I put them under the latch.

Maybe I'll paint the resistor tray, but for now I'm liking the "I made this look." 

To add to your list of mods: you need to wrap those exposed wires in plastic tubing of electrical tape. 

I'd like to get some of that plastic spiral wrap stuff.   Electrical supply place is closed on Saturday.

[stopintime]

Wash?  Huh? 

I'm worried the seat latch pin will hit the wires if I put them under the latch.

Ok, not under the latch itself - under the red bracket which holds the latch?

Maybe I'll paint the resistor tray, but for now I'm liking the "I made this look." 

Sign it with kids "fat" coloring (crayons?), then paint and afterwards scrape off the paint over the signature. Voila - home made, but beautiful....

I'd like to get some of that plastic spiral wrap stuff.   Electrical supply place is closed on Saturday.

Monday morning will be fine.

[Airborne]

which turn signals are those?

[DucHead]

which turn signals are those?

Kellermann Micro-1000s (all around).  I've had them on since April of '05, and they're showing signs of wear.

[DucHead]

Ok, not under the latch itself - under the red bracket which holds the latch?

That's a frame cross-member.  If I run the wires under there, they'll be exposed.    

  That said, they're already exposed -- from the tail liight to the frame.   

Monday morning will be fine.

I hope they carry it.  I've seen it here.

[Rameses]

You should've made that resistor bracket out of a sheet of CF. 


That said, it looks "make the beast with two backsing great!"   

[DucHead]

You should've made that resistor bracket out of a sheet of CF. 


That said, it looks "make the beast with two backsing great!"   

Thanks, man!

How was dinner?

If you have time in the next week or so, come on over with that belly pan, and maybe you can lend me a hand with my shock.   

[Jtree007]

looks nice and clean 

I hate working or dealing with wires that are not organized and tidy...

[geoffduc]

You should've made that resistor bracket out of a sheet of CF. 


That said, it looks "make the beast with two backsing great!"   

Dave i've a piece of CF 5ins x3ins if you want it 

Sorry about the name change, it's me having a senior moment  and yes the pm was for you